Pages

Saturday, October 2, 2010

AIR BREATHING ROCKET

AIR BREATHING ROCKET

INTRODUCTION:


When most people think about motors or engines, they think about rotation. For example, a reciprocating gasoline engine in a car produces rotational energy to drive the wheels. An electric motor produces rotational energy to drive a fan or spin a disk. A steam engine is used to do the same thing, as is a steam turbine and most gas turbines.

If you have ever shot a shotgun, especially a big 12-gauge shot gun, then you know that it has a lot of "kick." That is, when you shoot the gun it "kicks" your shoulder back with a great deal of force. That kick is a reaction. A shotgun is shooting about an ounce of metal in one direction at about 700 miles per hour, and your shoulder gets hit with the reaction. If you were wearing roller skates or standing on a skateboard when you shot the gun, then the gun would be acting like a rocket engine and you would react by rolling in the opposite direction.

If you have ever seen a big fire hose spraying water, you may have noticed that it takes a lot of strength to hold the hose (sometimes you will see two or three firefighters holding the hose). The hose is acting like a rocket engine. The hose is throwing water in one direction, and the firefighters are using their strength and weight to counteract the reaction. If they were to let go of the hose, it would thrash around with tremendous force. If the firefighters were all standing on skateboards, the hose would propel them backwards at great speed!

When you blow up a balloon and let it go so that it flies all over the room before running out of air, you have created a rocket engine. In this case, what is being thrown is the air molecules inside the balloon. Many people believe that air molecules don't weigh anything, but they do (see the page on helium to get a better picture of the weight of air). When you throw them out the nozzle of a balloon, the rest of the balloon reacts in the opposite direction.

for more info visit.
http://www.enjineer.com/forum

No comments:

Post a Comment