A Professional Development Course Design of Steel Structures Using IS 800: 2007 Technoesis November 13, 14, 20 & 21, 2009

A Professional Development Course Design of Steel Structures
Using IS 800: 2007 Technoesis November 13, 14, 20 & 21, 2009

Organised jointly by
Sardar Patel College of Engineering

Venue
Sardar Patel College of Engineering
Munshi Nagar, Andheri (W), Mumbai 400 058
For downloading brochure & registration form
visit www.spce.ac.in OR www.technoesis.co.in

Objective

IS: 800: 1984 (Code of Practice for General Construction in Steel) was based on the Working Stress Method of structural design. However the past two decades have witnessed significant advances in the ways steel structures are analyzed
and designed. In order to keep pace with such advances, the Bureau of Indian Standards has brought out the revised IS 800 : 2007, which was published in December 2007. The revised code is fundamentally different from its previous edition as it is based on the Limit State Method and provides for plastic analysis. It also includes several other provisions, which are radically different from the previous code.

This course aims at developing an insight into the new concepts, methodologies, codal provisions and their theoretical and practical aspects so that they can be successfully applied to real life structures. The proceedings will consist of lectures, numerical examples and discussions.

Course Content

1. Philosophy of Limit State Method
2. Design of Tension Members
3. Design of Compression Members
4. Plastic Analysis
5. Design of Flexural Members
6. Design of Plate Girder
7. Design of Roof Trusses
8. Design of Built-up Columns
9. Design of Column Bases
10. Design of various types of Connections

Schedule

The course will be conducted on 4 days …
November 13, 14, 20 & 21, 2009 (Fri & Sat)
Timing: 9:30 AM to 6:00 PM

Faculty

Each topic will be dealt with by experts from academic/ professional fields.

Benefits

From this course, the participants shall get a good understanding of the following:

Ø Use of the revised code IS 800: 2007
Ø Limit State Method of Design
Ø Plastic Analysis
Ø Design of various of steel members & structures
Ø Learning through numerical examples and interactive discussions

Certification

On completion of the course, certificate will be awarded jointly by Sardar Patel College of Engineering & Dhargalkar Technoesis (I) Pvt. Ltd.

Who Should Attend

Ø Civil/ structural engineers and consultants
Ø Civil engineers from govt and private sector
Ø Faculty in civil/ structural engineering from engineering colleges & polytechnics
Ø Fresh graduates, students

Supporting Organisations

Ø Association of Consulting Civil Engineers
Ø Indian Association of Structural Engineers
Ø American Concrete Institute - India Chapter
Ø Indian Society of Structural Engineers, Pune
Ø Architects, Engineers & Surveyors Association
Ø Indian Association of Structural Engineering
Ø Indian Concrete Institute

Participation Fees

The course fees including service tax shall be as follows:
Ø Up to 7 Nov … Rs. 8,275/-
Ø From 8 Nov … Rs. 8,825/-
Please note that seats are limited.

Special discounts are offered as follows:
Ø Faculty of colleges & polytechnics … 10%
Ø Engg. college students … 15%
Ø Group of 3 or 4 … 10%
Ø Group of 5 or more … 15%

Fees should be paid by cheque/ bank draft drawn in favour of "Dhargalkar Technoesis (I) Pvt. Ltd." payable at Mumbai. Fees cover training, course material, lunch and refreshments.

REGISTRATION FORM

Technical Committee

S.Y. Mhaiskar, SPCE
B.N. Pandya, SPCE
M.R. Shiyekar, SCOE
U. Dhargalkar, Consultant
D.S. Joshi, Consultant
H.S. Vadalkar, Consultant
T.P. Bandivadekar, RCOE
H.S. Pathak, SPCE
Satish Jain, Consultant
V. L. Shah, Consultant


Contact for Registration

Dhargalkar Technoesis (I) Pvt. Ltd.
D-104, Radha Govind, Opp. Dheeraj Savera
Near Siddharth Nagar, Off W.E. Highway
Borivali (E), Mumbai 400 066
Tel: (022) 28461500/ 1317/ 3012
Fax: (022) 28463012
Mobile: 9819732195
Email: training@technoesis.co.in