13th CRSI National Symposium in Chemistry & 5th CRSI-RSC Symposium in Chemistry, At National Institute of Science Education and Research, BHUWANES

13th CRSI National Symposium in Chemistry & 5th CRSI-RSC Symposium in Chemistry, At National Institute of Science Education and Research, BHUWANESHWAR


About Symposium

The organizing committee cordially invites you to attend the 13th National Symposium in Chemistry (NSC-13) to be held at the NISER, Bhubaneswar between 4-6 February 2011, under the auspices of the Chemical Research Society of India. The purpose of this National Symposium in Chemistry is to provide a forum for the scientists, teachers and students in the country to participate and discuss the recent development in chemical sciences. It is an opportunity for the younger scientists to get exposed to the excitement of chemical research. This National symposium also aims to promote exchange of ideas and create an environment for collaborative endeavors in the emerging frontier interdisciplinary areas. All the sessions/lectures will be held in the auditorium of KIIT University, Bhubaneswar. NSC-13 will include medal lectures and poster presentation apart from special lectures by eminent chemists from India and abroad. The program will also have a special thematic session.

CRSI and RSC will host the fifth joint symposium in chemistry on 6th February 2011, at KIIT University, Bhubaneswar. CRSI members interested in attending this symposium must clearly indicate it while registering.

General Information

Bhubaneswar, the city of thousand temples, is the capital of Orissa and was designed by the German architect Otto Knigsberger in 1946. It is well connected by air, rail and road to the rest of India.

National Institute of Science Education and Research (NISER) is a newly established, upcoming research institution in India, that operates under the umbrella of the Dept. of Atomic Energy (DAE).

KIIT University, Bhubaneswar holds the crown of being one of the fastest growing educational institutions in the country - stands as a testimony to Orissa's march in the field of education. This University owes its origin to the vision of noted educational and social entrepreneur, Dr. Achyuta Samanta.

Abstract and Poster Presentation

The abstract for the poster presentation must be submitted before December 31st, 2010. Please note that only ONE poster shall be accepted from each research group. However, there is no limit to the number of participants.

Format of Abstract

TITLE (14 PT BOLD, CENTERED)
Presenting author, other author(s), senior author* (12 pt normal), department name, institute name and address. The one page abstract should be created using MS Word, Times New Roman 10 pt, normal font, single space. Use A4 size with margins-top/bottom: 1 inch, left/right: 1.25 inches. References should be cited in parentheses e.g. Hoffmann et al (1) in the text. References should be typed in 9 points, normal font and single space. The entire abstract file including text, figures, equations, structures, schemes and references must be sent as a (authorname.doc) file. The printed area should be 5.8 inches (width) x 9.7 inches (length).

The abstracts should be uploaded in the online registration form only. Go to REGISTRATION page first.

Important Dates

Deadline for ABSTRACT submission : December 31, 2010
Announcement of accepted POSTERS : December 31, 2010
Deadline for REGISTRATION : December 31, 2010

Registration

Registration fees for the NSC-13 are given below.
Delegates (Industries) : 6,000
Delegates (Academiic) : 3,000
Life members * : 2,000
Student delegates : 1,000
Delegates (Outside India) : US$ 200
R.S.C. Members : US$ 100

* All interested life members are requested to complete the online registration before the dead line.

Registration is mandatory! Please get registered soon. ONLINE REGISTRATION FORM
Registration is also mandatory to upload ABSTRACTS.

Payment can be made in either of the following ways.

Money Transfer

The registration fee can be transferred to CRSI account through Net-banking or Cash deposit. The details are given below.
Account name : CRSI-RSC
Bank name : Indian Overseas Bank (Chandrasekharpur Branch)
A/c number : 147601000016501
IFSC Code (for domestic remittances) : IOBA0001476
SWIFT Code (for international remittances) : IOBAINBB159
N.B : Please collect the transaction reference number from bank. It is needed in the online registration form.

Crossed Demand Draft

The registration fee can be paid by DD drawn in favour of Convener, CRSI, NISER payable at Bhubaneswar.

Accommodation

Accommodation in Bhubaneswar will be arranged in different category of Hotels. The details of the hotels and the tariff are displayed on this page. Accommodation for the delegates will be confirmed only on the receipt of the accommodation fees well in advance. Since, limited accommodation is available, it will be allotted on first come first serve basis.

The accommodation for student participants have been arranged at KIIT International School Hostel on payment of a nominal fee of 100 per bed per day.

Contact Us

Dr. A. Srinivasan
Convener, 13th National Symposium in Chemistry
NISER, Bhubaneswar
Tel.: +91-674-2304077
Fax : +91-674-2302436
email : crsi [at] niser [dot] ac [dot] in

Dr. U. Lourderaj / Dr. C. S. Purohit
Co-Convener, 13th National Symposium in Chemistry
SCS, NISER
Tel: +91-674-2304055 / 2304054
email: u.lourderaj [at] niser [dot] ac [dot] in / purohit [at] niser [dot] ac [dot] in

Mr. Ramakant Kar
Administrative Officer-III, NISER
Tel: +91-674-2304010
email: adminofficer_iii [at] niser [dot] ac [dot] in

Correspondence

Dr. A. Srinivasan (Convener)
Dr. U. Lourderaj / Dr. C. S. Purohit (Co-Conveners)
13th National Symposium in Chemistry, NISER, Bhubaneswar
Tel.: +91-674-2304077, 2304055; Fax : +91-674-2302436
email : crsi [at] niser [dot] ac [dot] in

for more info visit.
http://www.enjineer.com/forum

Current Openings At Railsfactory

Current Openings At Railsfactory

Lead Rails Developer

Candidates with strong PHP/MySQL programming, organizational and communications skills:

Qualifications:

* Agile lead developer with good communication and attention to details
* Has expert programming skills in Ruby, Python, and/or PHP
* Uses preferably git and/or svn
* Has strong command of SQL (preferably PostgreSQL and/or MySQL)
* Plays around with Linux
* Has expert understanding and experience with MVC frameworks (Rubyon Rails, Django, Cake, Symfony, Zend)
* Has decent familiarity with HTML/DOM, JavaScript, CSS, and Ajax/Comet
* Has a good understanding of modern web standards such as RSS/Atom,JSON, RESTful, OpenSearch, etc

Senior Web Developer

Candidates with strong Ruby/MySQL programming, organizational and communications skills:

Qualifications:

* 4+ years Web programming with atleast 2-years in Ruby
* 1+ years PHP5/J2EE/PERL experience
* Understanding of basic object oriented programming concepts
* MySQL 4 & 5
* Has strong knowledge of a templating engine (ideally, Smarty)
* 2+ years experience with Javascript, AJAX, CSS & XHTML
* Understands concept of database normalization

Contact Us

RailsFactory
Reg: Sedin Technologies Private Limited
No.1, Kamakshipuram II Street, West Mambalam,
Chennai, TN, India -600033,
Phone: +91 44 43521306
Mobile: +91 98404 48539
Email: info@railsfactory.com
website: http://www.railsfactory.com/careers

for more info visit.
http://www.enjineer.com/forum

International Conference on Frontiers of Infrastructure Finance (ICFIF 2011) At Indian Institute of Technology, Kharagpur

International Conference on Frontiers of Infrastructure Finance (ICFIF 2011) At Indian Institute of Technology, Kharagpur

Organized by

Vinod Gupta School of Management (VGSOM) & RCG School of Infrastructure Design and Management (RCGSIDM)
Indian Institute of Technology Kharagpur, India

INTRODUCTION

Sustainable economic growth is one of the principal objectives of the developing world. The major precondition for attaining this goal, however, is the availability of infrastructure in the economy, both in passable quantity and quality. Infrastructure is considered as the wheel, if not the engine of development. The deficiency of infrastructure will certainly hamper sustainable economic growth. In most of the developing countries including India, the status of infrastructure is low as compared to the need of the respective countries. While the demand for infrastructure is growing at a much faster rate, supply is more or less stagnant. This is mostly due to the rapid urbanization and globalization taking place across the world.
The major hurdle for closing this demand and supply gap is the non-availability of finance for infrastructure creation. Despite the large number of projects that are either in progress or in the pipeline, India is continuously challenged to cope with an increasing demand for infrastructure services. The government has put together an ambitious plan to upgrade and expand infrastructure with special focus on urban infrastructure, particularly transportation, power, water, etc. Within this context the private sector is expected to provide the necessary investment through privatization and PPP schemes. The development of this sector is anticipated to stimulate economic growth, creat jobs, diversify economy and improve the quality of life in the country.
The aim of this International Conference on ‘Frontiers of Infrastructure Finance’ is to bring together different stakeholders from various parts of the world to a single platform to exchange views and share knowledge so as to build a road map for infrastructure creation and its management.

CALL FOR PAPERS

The objective of this conference is to present a platform for academicians, researchers, engineers, business analysts, financial analysts, statisticians, econometricians, economists, corporates, industry professionals and policy makers to deliberate, debate and work out the strategy for infrastructure financing and its creation.

Section A: Financial Infrastructure

* Modelling Financial Markets and Capital Markets
* Modelling and Forecasting Volatility
* PPP Model
* Bank Financial Modelling
* Financial and Contractual Design
* Infrastructure Leasing
* Islamic Finance
* Financial Derivatives
* Venture Capital
* Options and Future Markets
* SWAPS
* Financial Stability and Financial Inclusion
* Multilateral Development Agencies
* Export Credit Agencies Taxation and Subsidy

Section B: Social Infrastructure

* Water Sector Finance
* Housing Finance
* Education and Health
* Networking
* Social Capital
* Social Media
* PDS and Others

Section C:Transport and Communication Infrastructure

* Aviation Sector
* Roads and Railways
* Inland Waterways and Ports
* Telecommunication
* Satellite and Internet

Section D: Energy Infrastructure

* Power Generation
* Power Distribution and Consumption
* Power Equipment and Others
* Coal, Oil and Natural Gas
* Regulation of the Power Sector
* Renewable Energy
* Rural Infrastructure

Section E: International Finance

* International Financial Opportunities
* Synthetic Finance
* Foreign Exchange Market
* FDI and FII
* Special Purpose Vehicle
* Global Financial Crisis
* Portfolio Management
* Valuation of Intangible Assets
* Valuation of Techniques for M & A
* Valuation of Hedge Funds and Pension Funds
* IPO Valuation
* Credit Assessment and Financial Modelling
* Financial Programming
* Financial Engineering
* Applied Financial Econometrics

Section F: Strategy for Infrastructure Finance

* Private Company Valuation
* Intellectual Property Rights
* Budgetary Financing
* Debt and Equity Financing
* Public Private Partnerships
* Third Party Financing
* Project Financing
* Contractor Financing
* Customer Financing
* Credit Enhancement
* Investment and Trading

Section G: Project Finance

* Project Finance
* Power and Desalination Projects
* Cost Recovery Challenges and Subsidies Resource llocation
* Resource Leveling
* Risk Management in Infrastructure Projects
* Special Purpose Vehicle
* Project procurement and Project Appraisal
* Market Microstructure
* Risk Hedging Techniques
* Corporate Finance and Governance

Section H: Micro Finance

* Urban Micro Finance
* Social Performance and Responsible Micro Finance
* Micro Finance Institutions and Investment Opportunities
* SHG Bank Linkage Programme
* Micro Insurance
* Financial Inclusion and Financial Literacy
* Technology in Microfinance

Section I: Infrastructure Policy and Other Issue

* Public Policy Issues
* Urbanization and Urban Development
* Good Governance and Human Development
* Economic Development and Climatic Change
* Special Economic Zones
* Prudential Regulation and Super Visions
* Legal Issues of Infrastructure Financing
* Socio- Economic Policies
* Industrial Policies and Business Policies
* Other related Policies

SUBMISSION GUIDELINES

Participation in the conference will enormously benefit academicians, corporate analysts and consultants, economists, statisticians, engineers, policy makers, trade and business observers, young researchers, and persons in media & public life who are dealing with aspects and issues related to the themes of this conference. Research papers and cases based on research, experience, or promising ideas focusing on any of the stated objectives and themes of the conference are invited. The papers will be selected on the basis of their potential to contribute towards infrastructure development and financing. All papers will be assessed by a panel of experts.

Interested participants may please submit the abstract of paper for review on or before May 31, 2011. The authors are also encouraged to submit the full paper by this date. The chance of acceptance will be relatively very high, if the author could submit the full papers in time. The abstracts/ papers should be in MS Word (Word 2003 and above) format with double space, Times Roman font and font size 12 on single side of the paper. The papers should have an abstract of not more than 500 words and the full paper should be within 5000 words including tables and figures. Each paper should contain a title page specifying the title of the paper, full name, affiliation, telephone/ fax number and the e-mail address of the authors. The papers must be sent via e-mail to icfif2011@vgsom.iitkgp.ernet.in/ rudrap@vgsom.iitkgp.ernet.in before the deadline. Authors of all papers accepted for the conference will be required to give copyright declaration in the format to be supplied later.

The selected papers will either be published in a special issue of an indexed journal or in an edited volume by a reputed publisher. Detailed information about the submission guidelines can be found at the following link: http://www.som.iitkgp.ernet.in/icfif2011/. Please note that only the papers of the authors who complete the registration process by August 30, 2011 will be considered for publication.

REVIE CRITERIA

The paper/ abstract must give a clear indication of the objective, methodology, major results, implications, and key references. All abstracts will be blind reviewed and only those abstracts approved by the reviewers will be selected. At least one of the authors will be required to register and attend the conference to present the paper. The criteria for evaluation by the reviewers are as follows:

Relevance

Does the subject of the paper appeal to the interest of the conference attendees?

Methodology

Does the paper use sound and appropriate method (s)?

Originality

Does the paper add new findings, insights, or knowledge to the body of literature?

Research

Does the paper compare and weigh the material against the work of others?

Conclusions

Are the conclusions sound and justified as per the problem discussion?

Policy/ Managerial Implications

Are the policy implications relevant and useful for the problem demonstrated?

References

Are the references relevant and adequate?

IMPORTANT DATES

Submission of Abstracts/ Full Papers : 31 May 2011
Confirmation of Acceptance of Abstracts/ Full Papers : 15 June 2011
Full Papers Submission : 15 July 2011
Acceptance of Full Papers : 31 August 2011
Registration Deadline : 15 September 2011
Late Registration Deadline : 30 September 2011

REGISTRATION FEE

For National Participants For International Participants

Category A: Corporate and Industry Professionals Category A: Corporate and Industry Professionals
Rs. 4000/- USD 250
Category B: Academicians Category B: Academicians
Rs. 3000/- USD 200
Category C: Young Researchers and Students Category C: Young Researchers and Students
Rs. 2000/- USD 150

Registration Form

Note:

For international participants, travel between Kolkata airport and IIT Kharagpur campus will be arranged by the organizer.

Registration fee (non refundable) includes conference materials, refreshments, lunch and dinner on conference days. Registration fee for accompanying spouse is Rs. 2000/- for Indian delegates and USD 150 for foreign delegates. The spouses will be entitled to all conference facilities except conference kit. Registration should be completed by September 15, 2011. Participants intending to register after September 15, 2011 should pay an extra charge of Rs. 2000 (for Indian delegates) and USD 50 (for foreign delegates).
The last date for late registration is September 30, 2011. Individual letter of invitation, which can be used for obtaining Grants or VISA, will be sent on request.

MODE OF PAYMENT

1. Payments can be made through crossed demand draft drawn in favour of "CEP-STC, IIT Kharagpur”, payable at State Bank of India, IIT Kharagpur (Bank Code: 0202) and sent to the convenor of the conference. Or
2. Payments can be by electronic fund transfer. For this, the bank details are as follows:
Account Name: CEP-STC, IIT Kharagpur
Account Number: 95562200002955
Bank Name: SYNDICATE BANK
Bank Branch Name: SRIC, IIT KHARAGPUR (Branch Code: 9556)
Bank Address: IIT KHARAGPUR, KHARAGPUR- 721 302, MIDINIPUR DIST. (W. B.), INDIA (Telephone No: 03222 255221)
Swift Code: SYN BIN BB 120

NOTE:

In case of electronic money transfer, please submit a copy of money transfer record with details of bank, amount, transaction number and date. The bank proof must be attached with registration form.

ADDRESS FOR COMMUNICATION

Dr. Rudra P. Pradhan
Convenor, ICFIF 2011
Vinod Gupta School of Management
Indian Institute of Technology, Kharagpur
West Bengal- 721 302, India
Phone: +91 3222 282316 (Off)/ 282317 (Res)
Mobile: +919733742104
Fax: +91 3222 278027/ 255303
Email: rudrap@vgsom.iitkgp.ernet.in/ pradhanrp@yahoo.com

for more info visit.
http://www.enjineer.com/forum

International conference on Advances in Supply Chain and Manufacturing Management At Indian Institute of Technology, Kharagpur

International conference on Advances in Supply Chain and Manufacturing Management At Indian Institute of Technology, Kharagpur

Achieving Growth, Profitability and Sustainability in a Globalized Environment

The formation of the WTO and a parallel growth of the Information Technology and the Internet are the two most important events in recent times that has made nations more interdependent and closer. Free flows of people, information, products and services between national boundaries are fast becoming a reality ushering in a “Globalized World” integrating the economies and the societies. The phenomenon has equally impacted the supply chain and businesses are increasingly becoming global. In such a globalized and highly competitive environment sustaining growth and achieving profitability of the supply chain has become much more complex and challenging. The challenges are enormous in terms of understanding the dynamics and the complexity of the global supply chain. Time is opportune to develop innovative tools that can handle the complexities of the global supply chain and give efficient, effective and implementable solutions.

Further, customized products and changing taste of the customers have brought in severe challenges before the managers of the manufacturing firms of a supply chain to meet the accepted quality while satisfying the variety at minimum time and cost. Emergence of themes like agile manufacturing, network manufacturing, knowledgeable manufacturing, flexible systems of manufacturing management are some of the areas which are recommended as possible solutions to the vexed problem encountered by the manufacturing firm. In view of this, the conference aims at providing a platform where practitioner, researchers and academicians from diverse background interact and share their ideas and experiences in order to facilitate future collaborations for management of manufacturing activities, functional integration, solving supply chain problem and the related research agenda.

Call for Papers

Research papers, articles and case studies are invited from the authors to present and share their views, ideas and developments made in the field of supply chain and manufacturing management. The submissions will be peer reviewed by a committee of experts before acceptance. The authors are requested to refer to author guidelines for details.

Supply Chain Management

Sales and Operations Planning
Purchasing & Strategic Outsourcing
Logistics Management
Collaborative Planning & Forecasting
Risk Management
Supply Chain Best Practices
Retail Management
E-business and E-commerce
Sustainability of Environment

Manufacturing Systems

Production Planning, Scheduling and Control
Lean, Agile and Flexible Manufacturing
Network based manufacturing
Collaborative and global manufacturing
E- Manufacturing
Knowledgeable Manufacturing
Factory of the future Quality Assurance

Decision Science

Mathematical Programming
System Modeling and Simulation
AI application
Evolutionary Computations
Nature inspired optimization technique
System Dynamics
Multi-criteria decision making
Group Decision Making

We invite two types of papers - Research Papers and Concept Papers in the above broad areas.

Research Papers

Research papers, articles and case studies are invited from the authors to present and share their research work and developments made in the field of supply chain management. The submissions will be peer reviewed before acceptance.

Concept Papers

The conference also invites concept papers from thought leaders both practitioners and academicians for sharing newer ideas, concepts, and philosophical thoughts highlighting the critical issues, challenges and problems facing the practice of supply chain management. Such ideas, concepts or philosophies should be sent as a paper not exceeding 2500 words and will be peer reviewed before final acceptance.

The authors are required to submit their paper through the Microsoft research conference management system.
https://cmt.research.microsoft.com/ASCMM2011/

Publication

All accepted papers for which the authors have registered will be published in the conference proceedings to be brought out in electronic format. In addition to the conference proceedings few selected articles will also be considered for possible publication in the International Journal of Advanced Manufacturing Technology (Springer).

Important Dates

Submission of Full Length Paper: 30th June, 2011
Intimation of acceptance: 16th August, 2011
Deadline for Registration: 16th September, 2011

Registration

REGISTRATION FEE

Participants India Foreign

Student* (Regular) INR2000 USD200

Academic INR4500 USD350

Industry INR8000 USD500

Others INR8000 USD500

Late Registration** INR500 USD50

Accompanying Persons INR1500 USD100

* Part Time research students pursuing their doctoral research parallel to their service are not included

** Additional to the regular fee

Note: One registration is eligible for maximum two presentations. For each additional paper a fee of INR500 (US$50) will be charged.

MODE OF PAYMENT

Participants may register for the conference by sending the completed registration form alongwith the necessary registration fee to the following address:

The Organizing Secretary, ASCMM 2011
Department of Industrial Engineering & Management
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal
INDIA 721302



The payment can be made through a crossed demand draft drawn in favor of "CEP-STC, IIT Kharagpur”, payable at Kharagpur, INDIA. The payment can also be made through electronic fund transfer. The bank details are as follows:


Account Name: CEP-STC, IIT Kharagpur
Account Number: 95562200002955
Bank Name: SYNDICATE BANK
Bank Branch Name: SRIC, IIT KHARAGPUR (Branch Code: 9556)
Bank Address: IIT KHARAGPUR, KHARAGPUR- 721 302, MIDINIPUR DIST. (W. B.), INDIA
(Telephone No: +91-3222 255221)
Swift Code: SYN BIN BB 120

Note: In case of electronic money transfer, please submit a copy of money transfer record with details of bank, amount, transaction number and date. The same must be enclosed with registration form.

Download Registration Form

Travel and Accomodation

Nearest airport to Kharagpur is Kolkata. Situated about 120 km west of Kolkata, Kharagpur can be reached in about 2 hours by train from Howrah railway station of Kolkata or 3 hours by car from Kolkata Airport(http://www.iitkgp.ac.in/train/) . The Institute is about 10 minutes drive (5 km) from the Kharagpur railway station. Private taxi, autorickshaw or cycle-rickshaw can be hired to reach the Institute. To get the details of IIT Kharagpur campus, please visit http://www.iitkgp.ac.in/map/index.php and http://www.iitkgp.ac.in/topfiles/pocket_guide.php .

Limited accommodations are available for the participants on payment of a nominal fee in various guest houses of the Institute. They will be allotted on first come first served basis. For tariffs and other details please visit http://www.iitkgp.ac.in/gh/.

Who Can Attend

The conference aims to provide a platform to a diverse group of professionals and academicians to interact and share their perspectives. The scope of conference will accommodate academicians and industry professionals working in the domains of manufacturing and supply chain management, shop floor control, quality engineering, materials and procurement management and productivity enhancement. Supply chain and manufacturing problems are often so diverse and complex that they require many perspectives to the problem including operations management, finance and accounting, strategic management, human resource management, relationship management, information technology, computer science, behavioral science and logistics management. The sharing of ideas, experiences, cases and research works by practitioners and academicians will help any interested participant to develop a multiple perspectives while addressing supply chain problems. Therefore, any organization who is looking beyond the organizational boundaries for cost cutting and removal of waste, and improving collaboration with business partners will find this conference value adding. The conference will also be of immense value to an IT professional by way of getting a deeper insight of the facilitator role of IT towards supply chain integration and coordination.

Contact Us

The Organizing Secretary, ASCMM 2011
Department of Industrial Engineering & Management
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal
INDIA 721302
Telephone: +91-3222-283734
+91-3222-282271
Fax: +91-3222-282272
E-mail: icascmm2011@gmail.com

for more info visit.
http://www.enjineer.com/forum

INTERNATIONAL CONFERENCE ON ADVANCES IN POLYMER SCIENCE AND RUBBER TECHNOLOGY (APSRT) CHALLENGES TOWARDS 2020 AND BEYOND At INDIAN INSTITUTE OF TECHNO

INTERNATIONAL CONFERENCE ON ADVANCES IN POLYMER SCIENCE AND RUBBER TECHNOLOGY (APSRT) CHALLENGES TOWARDS 2020 AND BEYOND At INDIAN INSTITUTE OF TECHNOLOGY, KHARAGPUR

ABOUT THE CONFERENCE

The real journey of macromolecules started in 1920s when Hermann Staudinger introduced the revolutionary concept of 'Macromolecules'. The foundation stone of rubber technology was laid, when Charles Goodyear first started and patented the vulcanization of natural rubber in 1839. There have been tremendous advances in science and technology of polymer
and rubber since last few decades. Apart from their conventional application in the field of construction, automobiles, engineering and defence, polymers and rubbers are now being used in critical applications like in aerospace, microelectronics, medical and biomedicals. The continuous development in polymer based advanced materials for self healing, shape memory, microelectronics etc are expected to change the quality of human life in future. Due
to globalization as well as recent economic recession there are interesting developments in polymer and rubber industries. Different industries and research institutions have been urged to develop new polymers and polymeric materials and to explore new innovative technology for production of quality products. This International Conference will delineate
recent developments in the science and technology of polymers and rubbers. It will also focus on the future trends in the field of polymer and rubber science towards the next decade which will bring the completion of almost a century since the concept of “Macromolecules” put forward by Staudinger. This conference will include plenary lectures, invited lectures, special lectures by experts from academia and industries. Young scientists are also encouraged to give oral and poster
presentation.

Rubber Technology Centre

Rubber Technology Centre (RTC) is a unique Centre, the first of its kind in our country. The first Rubber Technology Laboratory in our country for the purpose of teaching and research was established in 1955 in the Department of Applied Chemistry in IIT, Kharagpur under the collaborative program with the British Government (the Colombo Plan), the USA Government (Technical Collaboration Mission) and Ministry of Education, Government of India. The independent Rubber
Technology Centre was established in 1981. The Centre acquired advanced processing, testing and characterization equipment from Indo-British, Indo-French Collaborative Programs and also a large number of research projects from CSIR, DST, DAE, ISRO, ARDB, DRDO, DBT, RDSO. During last three decades since its inception this Centre has done pioneering work in research and education in rubber and polymer science and technology. The Centre has many research projects funded by different Government funded agencies, industries (in India and abroad) and importantly by National &
International collaborative / exchange research program. The Centre is now well-equipped with different modern analytical instruments required for the basic and applied research in rubber and polymer science and technology. The state of the art research program of the Centre is focused on the development of new products, novel processing technology, polymer blend & alloys in developing advanced materials like nanocomposites, novel block and graft
copolymers, thermoplastic elastomers (TPE), smart materials, thermoreversible self-healing materials, EMI shielding materials.

Conference Topics

New methods for synthesis of polymers and rubbers
Chemical and physical modification of polymers and rubbers
Polymer blends & composites
Nanotechnology with polymer
Polymers in life science
Polymers in energy
Polymers in separation/purification
Characterization of polymers & rubbers
Polymer/Rubber compounding & processing
Smart polymers and composites
Paints, coatings and adhesives
Design and development of different rubber products
Recycling of polymers & rubbers
Intellectual property rights in polymers

Conference Language

English

Accommodation

Accommodation will be arranged on request in Hotels/Guest Houses. Charges will be paid by the participants.

Venue & Duration

The conference will be held in the Indian Institute of Technology, Kharagpur during March 3-5, 2011.

Place and Climate

Kharagpur is about 120 km south-west of Kolkata and is well connected by rail and road with important metros like Delhi, Mumbai, Chennai, Bangalore and Kolkata and also with other important cities in India. It is known that Kharagpur Railway station has the longest railway platform in the World. The distance from Kolkata airport (an International airport)
to Kharagpur is about 130 km and is travelled in about 2 hours by car. The climate at Kharagpur during early March is very
O pleasant. Temperature varies from 17-25 C.

Important Dates & Deadlines

Deadline for one-page abstract : Jan. 10, 2011
Notification for acceptances : Jan. 17, 2011
Deadline for full manuscripts : Feb. 7, 2011
(Extended abstract)
Last date for advance registartion : Feb. 15, 2011

Registration Fees

Overseas Delegates:

Participant : $ 400
Accompanying person : $ 150
Students : $ 250

Indian Delegates:

Industry : ` 8000/-
(` 7000 for IRI/AIRIA Member)
Academia / Research Institute : ` 4000/-
Students : ` 2500/-
Accompanying person : ` 1500/-

For registration after January 31, 2011 and spot registration: 20% extra charges will be applicable.

Publication

Authors of papers selected for presentation in the conference will be expected to give oral presentation or poster presentation during the conference and submit the complete manuscript (3-4 pages) as per guidelines before the deadline.
All accepted abstracts and papers will be published in proceedings.

Exhibition

An exhibition will be organized during the conference. Limited stalls (2.5m x 2.5m) will be available and will be distributed on “first come first served basis”.

Proceedings

Abstracts of accepted papers will be published in the conference proceedings which will be handed over to the delegates at the registration counter.

All payments will be made in favor of “APSRT 2011” payable at Syndicate Bank, Kharagpur or any other National Bank at Kharagpur

Contact Address

Dr. Nikhil K. Singha / Prof. Dipak Khastgir
Rubber Technology Centre
Indian Institute of Technology
Kharagpur 721302
West Bengal, INDIA
Phone : +91 (0)3222 283178 (O)
+91 (0)3222 283179 (R)
+91 (0)3222 283192 (O)
+91 (0)3222 283193 (R)
Mobile : +91 (0) 9434369873
+91 (0) 9434033477
Fax : +91 (0)3222 282292 / 255303
Gram : Technology Kharagpur
Weblink : http://www.iitkgp.ac.in/downloads/apsrt1_rtc.pdf
E-mail :
apsrt2011@yahoo.com
nks8888@yahoo.com
dkhastgir@yahoo.co.uk

for more info visit.
http://www.enjineer.com/forum

NATIONAL WORKSHOP on Advanced Computational Applications using ANSYS Fluent At National Institute of Technology, Warangal

NATIONAL WORKSHOP on Advanced Computational Applications using ANSYS Fluent At National Institute of Technology,Warangal

ABOUT ANSYS-FLUENT

Since its inception in 1983, Fluent has established itself as a global leader among commercial Computational Fluid Dynamics (CFD) vendors, becoming the largest supplier of CFD software in the world. In May of 2006, Fluent Inc. was acquired by ANSYS, Inc. (NASDAQ: ANSS), the world’s largest independent supplier of computer-aided-engineering (CAE) simulation software and solutions.

ANSYS’ acquisition of Fluent enhances the breadth, functionality, usability and interoperability of the ANSYS portfolio of simulation solutions, and as such, accelerates our progress towards Simulation Driven Product Development (SDPD).
This combination of ANSYS and Fluent technologies will enable customers to increase operational efficiency, lower design and engineering costs, and accelerate development and delivery of new and innovative products to the marketplace. Together, ANSYS and Fluent represent one of the most complete, independent engineering simulation software offerings in the industry, reaffirming and strengthening the ANSYS/Fluent commitment to open interface and flexible simulation solutions built upon world class technologies.

FOCUS/OBJECTITVES

The main aim of the Workshop is to enable participants to learn about various advanced computational applications using Fluent software.

WORKSHOP CONTENT

• Overview of Computational Techniques
• Applications of ANSYS Fluent software in CFD
• Introduction to ANSYS Workbench
• Introduction to Fluent Solver
• Hands on ANSYS Fluent software

WHO CAN ATTEND

The Workshop is open to variety of participants from all parts of the country including: Applied mathematicians, Mechanical Engineers, Chemical Engineers and Biomedical engineers

ABOUT THE DEPARTMENT

The department of mathematics is one the reputed departments, which functions with ‘excellence’ as its motto. Started in the year 1959, along with the other engineering and science departments, it has steadily grown as a dynamic center for academic and research activities. The Department offers Two 2-year (Four Semester) PG programmes namely: M.Sc (Applied Mathematics) and M.Sc. (Mathematics and Scientific Computing). The Department also offers Ph.D programme in Mathematics and also has been recognized as QIP centre for Ph. D. in Mathematics.

RESOURCE PERSONS

The resource persons will be mainly from the Department of Mathematics, NIT Warangal. In addition to this eminent speakers from INNOVENT Engineering Solutions Pvt. Ltd., Bangalore are also delivering lectures.

IMPORTANT DATES

The number of delegates aimed for the program is limited to 30. Therefore, the registration is based on the first come first serve basis.

The completed registration form in the prescribed format should reach

Dr. H.P. Rani, Assistant Professor
Department of Mathematics
National Institute of Technology
WARANGAL – 506 004 A.P.
Fax : 0870-2462834
E-mail : hprani@nitw.ac.in;
hprani@gmail.com

Last date for Registration: 27th Dec 2010
Confirmation by e-mail : 28th Dec 2010

Contact Us

COORDINATORS

Dr. H. P. Rani
Assistant Professor, Department of Mathematics
National Institute of Technology
Warangal – 506 004 A.P.
Phone : 0870-2462 800/801/834
Mobile : 099081 43247
Fax : 0870-2462834
E-mail : hprani@gmail.com

Mr. C.P. Venkateshwaran

INNOVENT Engineering Solutions Pvt. Ltd.,
No.5, 1st Floor, 1st Cross,
10th ‘A’ Main, Indiranagar II Stage,
Bangalore - 560 038
Tel: 080-25205015 / 16 / 17
Fax: 080-25205018
URL: www.innoventengg.com

for more info visit.
http://www.enjineer.com/forum

National Conference on Information & Communication Technology: Opportunities & Challenges in 21st Century, At Birla Institute of Technology, NOIDA

National Conference on Information & Communication Technology: Opportunities & Challenges in 21st Century, At Birla Institute of Technology, NOIDA

Call for Papers

The original papers from following topics (but not restricted), are invited for presentation in the conference:

• Ad Hoc and Sensor Networks
• Advanced Software Engineering
• Applications of ICT in societal development
• Computer and Network Security
• E-Learning, e-commerce, e-Business and e-Governance
• High-performance Computing
• Real-time Embedded Systems
• Information Retrieval
• Mobile Computing
• Mobile networks and Wireless LAN
• Network reliability, QoS & Resource Management
• Parallel and Distributed Computing
• Quantum Computing
• Future trends in Computer Networks
• Upcoming Telecommunication Technologies
• Web Mining
• Wireless Communications

Submission Process

Papers must be submitted electronically at conference email address bitnoida_conf@bitmesra.ac.in in the prescribed conference format. All the papers will be peer reviewed by out review committee members and will also be published in the conference proceedings. All the accepted papers will be given a chance for a presentation during the conference.

Authors Guidelines

Authors should prepare a PDF or Word document in the prescribed format. The submitted papers should not exceed 6-8 pages, including an abstract.

In order to get the paper published in the conference proceedings, atleast one listed author of the final paper must register and attend the Conference to present the paper. NCICT-2011 reserves the right to exclude a paper from publication, if the paper is not presented at the conference.

Review Process

All submissions will undergo a reviewing proess by the Review Commitee. Criteria for paper evaluation include relevance for the conference, importance of the topic with the current scenario, quality of analysis and evidence, organization, contribution to related research activity and overall quality of the paper.

Organized by:

Department of Computer Science,
Birla Institute of Technology,
Extension Center, NOIDA


The National Conference on Information & Communication Technology: Opportunities and Challenges in 21st Century (NCICT-2011), aims to draw together eminent academicians, scientists, researchers, technocrats, government representatives and experts across all fields of computing and to discuss the practical challenges encountered and the solutions adopted. This new path will eliminate isolation, discourage redundant efforts and promote scientific progress aimed to accelerate India’s overall growth to prominence on the International front.

The two-day event will include the following technical and non-technical programmes-

• Inaugural Session
• Speeches by experts
• Paper presentations
• Students project (if any)
• Valedictory Session

Relevant Dates

For Paper Contributors:
Abstract Submission : 30th December’2010
Acceptance Notification : 10th January'2011
Full Paper Submission : 20th January'2011
Last Date for Registration : 22nd January'2011

For Non-Contributors:

Last Date for Registration : 20th January'2011

Registration

The registration deadline for the conference is 10th January'2011. All the payment should be made through a Demand Draft drawn in favor of Birla Institute of Technology and payable at Noida along with a completely filled registration form.

Registration Fees

• Delegates from Industry
Contributors - Rs. 1500
Non-Contributors - Rs. 2000

• Delegates from Academics - Rs. 1500

• Students - Rs. 500
On Spot Registration - Rs. 2500

Accommodation

Delgates are requested to kindly contact the nearby hotels directly for booking of accomodation as per their arrival/departure schedule.

Location

Contact Us

The NCICT-2011 committee welcomes individuals and organizations wishing to participate in this Conference. If you desire any additional information about participation in NCICT-2011, please contact on the following address.

Email: bitnoida_conf@bitmesra.ac.in
URL: http://www.noida.bitmesra.ac.in

Office : +91 120 2553661/62
Fax : +91 120 2554146

Further queries, if any, can be addressed to:

Ms. Charu Wahi Convener,
NCICT-2011
Assistant Professor,
Department of Computer Science
Birla Institute of Technology
A-7, Sector -1
Noida - 201301
U.P. INDIA
Email : charu@bitmesra.ac.in
Mobile : +91 9811449466

for more info visit.
http://www.enjineer.com/forum

International Conference on Industrial Engineering 2011, At National Institute of Technology, Surat

International Conference on Industrial Engineering 2011, At National Institute of Technology, Surat

ABOUT CONFERENCE

The international conference on “Modern Trends in Industrial Engineering (MTIE-2010) is being organized to bring researchers and experts from academia and industry on a common platform to discuss the latest technologies and managerial tools being adopted in the field of Science, Technology and Management. It will help to provide an opportunity for all branches of industries, to disseminate the information on most recent and relevant research, theories and practices in the area of Industrial Engineering. The Conference deliberations are being structured to cover the following themes:

-Industrial Engineering Education and Training
-Manufacturing Systems
-Engineering Economy and Cost Analysis
-Supply Chain Management Systems
-Information and Communication Technology Systems
-Total Quality Management Systems, Six Sigma
-Technology and Knowledge Management
-Reliability and Maintenance Engineering
-Products and Process Innovations
-Innovations in HRD Systems
-Optimization Techniques in Industrial Engineering
-Decision Analysis, Systems Modeling and Simulation Methods
-Small Scale Industries and Entrepreneurship
-Trends in IE practices and challenges to IE profession
-Social Re-engineering

PUBLICATION & BEST PAPER COMPETITION

All submissions are peer reviewed. Accepted papers will be published in the conference proceedings in Hard and soft bound form. The author has to submit the copyright. Extended papers may be considered for s p e c i a l i s s u e s o f s e l e c t e d I n t e r n a t i o n a l Journals/National Journals, subject to further review. The three best papers will be selected for cash awarded out of total submitted papers. A few consolation prizes will also be given. The criteria for
Awards will be decided by Conference Advisory Committee.
Patron:
Dr. P. D. Porey, Director, SVNIT-Surat
Conference Advisor:
Dr. R. P. Mohanty, ITM Group of Institutions, Mumbai

IMPORTANT DATES

Receipt of formatted manuscripts for review (full paper) : st 1 July, 2011
th Confirmation of acceptance of papers: 15 August, 2011
Final submission of accepted papers for the proceedings: st 1 September, 2011
st Last date of Registration: 1 October, 2011
Conference : November 17-19, 2011
Guidelines for preparing the manuscript will be available on institute website.

REGISTRATION

The registration fees for participants are:

Academic & Research Rs. 2000/-
Student Delegate Rs. 1500/-
Industry Delegate Rs. 3000/-
Foreign Delegate $ 200

The registration fees includes conference kit, three lunches, tea and two dinners

Travel and accommodation expenses of the participants will have to be borne by the participant.
Information regarding the hotel and their tariff will be provided on request.
The payment of the registration fees should be Demand Draft drawn in favour of “Director, SVNIT, Surat”.

Organized by

Department of Mechanical Engineering
S.V. National Institute of Technology, Surat

In Association with
Indian Institution of Industrial
Engineering (IIIE),
NHQ-Mumbai

For information and correspondence, please contact:

Prof. Tushar Desai / Dr. Ravi Kant
Organizing Secretary (MTIE 2011)
Department of Mechanical Engineering
S. V. National Institute of Technology
Ichchhanath Dumas Road, Surat,
Gujarat 395007
E-mail: tushardesaisvnit@gmail.com
ravi.kant@med.svnit.ac.in
Phone : 0261-2201990(O- Prof. T. N. Desai)
0261-2201845 (O- Dr. Ravi Kant)
09924680088 (M-Prof.T. N. Desai)
09714827744 (M-Dr. Ravi Kant)

for more info visit.
http://www.enjineer.com/forum

International Conference on Recent Trends in Information Technology At College of Engg, Anna University, Guindy, Chennai

International Conference on Recent Trends in Information Technology At College of Engg, Anna University, Guindy, Chennai

About Conference

Rapid development in the area of information technology in the past few years has led to unprecedented increase in the number of people using these technologies and also the interest in research and development. ICRTIT 2011 aims to bring together innovative academics, researchers and industrial experts in the field of Information Technology, Computer Science and Communications and allied fields to a common forum, for a constructive dialog on theoretical concepts and practical ideas. Practicing engineers and technologists, scientists from R & D Institutions, faculty members of engineering colleges, research scholars and post graduate students are expected to participate in this conference.

Venue of the Conference:

Rajam Hall,
Madras Institute of Technology,
Anna University Campus,
Chrompet, Chennai,
Tamil Nadu, India.

Call For Papers

Authors must submit their paper(s) both in MS word document & pdf file formats, and the paper should not exceed 6 pages.

Click here to download the IEEE format,
document format
pdf format

Please submit the papers by creating an user account in the following link, http://www.easychair.org/conferences/?conf=icrtit2011

Important Dates

Paper submission due Feb 15, 2011
Notification of Acceptance April 01, 2011
Camera Ready papers submission April 15, 2011
Early Bird Conference Registration May 01, 2011
Conference June 03-05, 2011
Tutorial Proposal Feb 15, 2011

Contact Us

For further information, please contact:

Dr.Vaidehi.V,
Convener-ICRTIT 2011,
Professor and Head,
Department of Information Technology,
Anna University Chennai,
Madras Institute of Technology Campus,
Chromepet, Chennai-600 044.
Phone : (91)44-22516306,6024
Email-id : icrtit2011@gmail.com
URL : http://www.annauniv.edu
http://www.mitindia.edu

for more info visit.
http://www.enjineer.com/forum

2ndInternational Conference on Computer and Communication Technology (ICCCT-2011) on 15th to 17th September 2011 At Motilal Nehru National Institute o

2ndInternational Conference on Computer and Communication Technology (ICCCT-2011) on 15th to 17th September 2011 At Motilal Nehru National Institute of Technology, Allahabad

Call For Papers

The International Conference on Computer and Communication Technology (ICCCT 2011) is the premier forum for the presentation of new advances and research results in the fields of Computer and Communication. The conference will bring together leading researchers, engineers and scientists in the domain of interest from around the world. Topics of interest for submission include, but are not limited to:

Tracks/Topics

Hardware and Software Design:

o • Algorithms
o • Compilers and Interpreters
o • Computer Architecture
o • Digital System and Logic Design
o • Theoretical Computer Science
o • Modelling languages and Simulations
o • Real and Embedded Systems
o • Formal Methods

Distributed and Parallel Processing:

o • Parallel and Distributed Computing
o • Distributed Systems
o • High Performance Computing
o • Grid Computing
o • Cloud Computing.

Advance Software Engineering:

o • Automated Software Engineering
o • Web Based Software Engineering
o • Software Testing
o • Software Project Management
o • Software Processes and Workflows
o • Computer Aided Software Engineering
o • Component Based Software Engineering
o • Software Quality Assurance
o • Artificial Intelligence in Software Engineering.

Computer Graphics and Multimedia:

o • Image Processing
o • Data Compression
o • Internet and Web Applications
o • Computer Modeling
o • Multimedia Applications
o • Computer Vision
o • Audio Video Systems
o • Pattern Recognition

Computer communication:

o • Computer Networks
o • Data Communications
o • Mobile Computing
o • Wireless Communication
o • Mobile Computing
o • Wireless Sensor Networks

Security:

o • Network and Information Security
o • Cryptography
o • System Security
o • Computer Security
o • Digital Signal Processing
o • Information Security
o • Data Encryption,
o • Forensics
o • Fraud Control
o • Intellectual Property Protection

Artificial Intelligence:

o • Robotics and Automation
o • Natural Language Processing
o • Fuzzy Logic
o • Knowledge Acquisition and Expert Systems
o • Design Automation
o • Reasoning and Decision Support Systems

Advance Database Management System:

o • Distributed Database Systems
o • Data Mining
o • Data Warehouse
o • Knowledge Data Engineering
o • Behavioral Mining
o • Decision Trees

Evolutionary Computing:

o • Genetic Algorithms
o • Multi-Objective Optimization
o • Computational Intelligence
o • Neural Networks
o • Evolutionary Algorithms
o • Differential Evolution
o • Combinatorial Optimization

Call For Workshop Proposals

The ICCCT-2011 organizing committee invites proposals for workshops to be held at the International Conference on Computer Communication &Technology, immediately prior to the technical conference, on Thursday, September 15, 2011 in Motilal Nehru National Institute of Technology, Allahabad, UP, India.

ICCCT-2011 will provide an informal setting where participants will have the opportunity to discuss specific technical topics in an atmosphere that fosters the active exchange of ideas. Members from all segments of the Computer and Communication community are invited to submit workshop proposals for review. Workshops that focus on new and emerging topics, or on applications, are particularly encouraged. To facilitate interaction and a broad exchange of ideas, each workshop will be limited to 50 participants and should plan for ample time to foster open discussions. Affiliated workshops will be held on Thursday-Friday, September 15-16. The purpose of these workshops is to provide a platform for presenting novel ideas in a less formal and possibly more focused way than the conferences themselves. As such, they also offer a good opportunity for young researchers to present their work and to obtain feedback from an interested community. The format of each workshop is to be determined by the organizers, but it is expected that they contain ample time for general discussion. The preference is for one-day workshops, but other schedules will also be considered.

Submission Information

Proposals for workshops should contain :

• A title and brief (2-page max) description of the workshop topic and content.
• A brief discussion of why and to whom the workshop is of interest
• The desired workshop length (one or two days), and an estimate of the audience size.
• The names, postal addresses, phone numbers, and email addresses of the organizers, with one-paragraph statements of their research interests and areas of expertise.
• A budget.
• A list of potential members of the program committee, with an indication of which members have already agreed.
• A description of any shared tasks associated with the workshop.
• A description of special requirements for technical needs.
• The name of the primary contact for the organizing committee; this person must have an email address.
• The URL of the workshop web site.

Responsibilities of ICCCT 2011 and Workshop Organizers

For all accepted proposals, ICCCT-2011 will be responsible for :

• Providing publicity for the workshop series as a whole.
• Providing logistic support and a meeting place for the workshop.
• Together with the organizers, determining the workshop date and time.
• Duplicating working notes and distributing them to the participants.

Workshop organizers will be responsible for the following :

• Setting up a Web site for the workshop according to the template that will be distributed upon acceptance.
• Advertising the workshop and issuing a call for participation/papers. The call must make it clear that the workshop is open to all members of the Computer & Communication community. It should also note that the number of participants is strictly limited. The call should also make clear the process by which the Organizing Committee will select the participants.
• Collecting submissions, notifying acceptances in due time, and ensuring a transparent and fair selection process. All workshop organizers commit themselves to adopt the same deadlines for submissions and notifications of acceptance.
• Making the PDF of the whole workshop notes available to the workshop chair (up to a maximum of 200 pages) as well as a list of audio-visual requirements and any special room requirements.
• Ensuring that the workshop organizers and the participants get registered to the workshop are invited to register to the main conference.

ICCCT-2011 encourages the production of publications based on the workshops, but the ICCCT-2011 name cannot be used on such publications without prior permission. ICCCT-2011 reserves the right to cancel any workshop if deadlines are missed or if too few attendees register for the workshop to support its running costs. To cover costs, it will be necessary to charge workshop participants a workshop fee

Please send proposals and inquiries to: iccct2011@gmail.com

Call For Tutorial Proposals

The ICCCT-2011 organizing committee invites proposals for tutorials to be held at the International Conference on Computer Communication & Technology, on Thursday, September 15, 2011 in Motilal Nehru National Institute of Technology, Allahabad, UP, India. Proposals are invited for pre-conference tutorials. Tutorials/workshops can be of half-day (3 hours with a half-hour break) or full-day duration (6 hours in two sessions with two half-hour break) on core techniques and areas of knowledge that enjoy broad interest within the Computer Communication & Technology Community. We are seeking tutorials on established or emerging research topics within the field itself, but we also welcome tutorials from related research fields or application areas provided they are of sufficient interest to the Computer and Communication Community. For detailed descriptions of each tracks click here.

Tutorials should provide participants with information and instruction on well-established or new cutting edge topics or tools, relevant to the conference tracks. Introductory to advanced tutorial sessions are welcome. They are intended to offer participants an opportunity to learn about new research or applications, to get an introduction to important established topics or tools, or to develop higher skill levels in areas in which they are already knowledgeable.

Tutorial participants will not be given tutorial proceedings in a hardcopy format. Instead, organizers of the tutorials will make the proceedings available on their web site prior to the conference/CDs writing the tutorials.

How to Propose a Tutorial

Proposals should provide sufficient information to evaluate the quality and importance of the topic, the likely quality of the presentation materials, and the speakers' teaching ability. When proposing a tutorial, please use the following boldface text as the section headings in your proposal. The proposal should be 2-3 pages long (plus possibly extra materials).

• Topic overview : What will the tutorial be about? Why do you believe this is an interesting and significant subject for the machine learning community at large?
• Target audience : From which areas do you, expect potential participants to come? What prior knowledge, if any, do you expect from the audience? What will the participants learn? How many participants do you expect?
• Content details : Provide a detailed outline of the topics to be presented, including estimates for the time that will be devoted to each subject. Aim for a total length of approximately three hours. If possible, provide samples of past tutorial slides or teaching materials. In case of multiple presenters, specify how you will distribute the work.
• Format : How will you present the material? Will there be multimedia parts of the presentation? Do you plan software demonstrations? Specify any extraordinary technical equipment that you would need.
• Organizers & presenters' expertise : Please include the name, e-mail address, and web page of all presenters. In addition, outline the presenters' background and include a list of publications in the tutorial area.

Tutorial proposals should be submitted via email in PDF format to iccct2011@gmail.com as early as possible but not later than May, 15 2011. after submission, proposers should expect to receive a verification of receipt.

Venue

How To Reach MNNIT Allahabad

Allahabad city is situated in the north part of India in the Oudh region of state of Uttar Pradesh. It is well connected with flights, rail and road transport to other parts of India. Daily trains, buses and flights are available from major cities in India.

Allahabad By Air

Allahabad has its own domestic airport named Bamrauli airport which is 15 km away from the heart of the city. Airport is connected to metros like Delhi, Kolkata and Lucknow. Airport to city taxi charge is about Rs 400. Abroad travelers need to get connection flights from Delhi or Kolkata.

Allahabad By Bus

Very good road services are available in Allahabad. UPSRTC buses give service to most of the cities in Uttar Pradesh. From Allahabad bus services are available to Delhi (650 km) and Kolkata (800 km).

Allahabad By Train

Allahabad has a major railway station in the heart of the city and is well connected to all the important cities in India

About the city

The city is a primary center for culture, religion and education. The confluence of Ganga, Yamuna and mythical Saraswati rivers defines this city. Many national and regional headquarters of administration, military and research facilities are located in the city.

Allahabad is also famous for producing 7 out of 14 Prime Ministers of India - Jawahar Lal Nehru, Lal Bahadur Shastri, Indira Gandhi, Rajiv Gandhi, Gulzari Lal Nanda, Vishwanath Pratap Singh and Chandrashekhar, they all were either born in Allahabad, were alumni of Allahabad University or were elected from a constituency in Allahabad.

Climate: (Sept) Moderately Hot. Temperature varies from 15 to 390C.
Languages spoken: Hindi, Urdu, English
Tourist attractions: Sangam(confluence of rivers), All Saints Cathedral, Alfred Park, Khusro Bagh, Yamuna Bridge, Public Library (estd 1864), Allahabad University (estd 1887), etc.

For more information please visit the website of Uttar Pradesh Tourism.

Submission Instruction

Paper Submission Guideline:

Simultaneous submissions(papers already submitted to other conferences/ journals) are not allowed.

All papers must follow strict IEEE formatting instructions. Violation of which leads to rejection of the paper.

Please do not submit plagiarised papers. Strict actions will be taken against the authors of those papers.

For more details about manuscript preparation, please refer to the authors templates given below.

• MS Word template : (MS-Word template)
• LaTex Formatting Macros :(Tex Templete)

Paper must be in pdf format and must satisfy following requirements :

• Paper Size: US Letter format (8.5" x 11").
• Paper Length: Up to 6 pages, including figures, tables & references. A maximum of two additional pages are permitted, with an additional charge of INR 1000 per page, to be paid during author registration.
• Paper Formatting: double column, single spaced, 10pt Times New Roman font.
• Margins: Left, Right, and Bottom: 0.75" (19mm). The top margin must be 0.75" (19 mm), except for the title page where it must be 1" (25 mm).
• File Size Limitation: 5.0MB.
• No page numbering on the manuscript is allowed.

Note: Violations of any of the above specifications may result in rejection of your paper.

Copy right form: In order to publish their paper in the conference proceeding, the authors are required to submit a signed IEEE copy right form for each accepted paper.

Important Dates

Paper Submission Deadline March 1, 2011
Notification of Acceptance May 15, 2011
Final Paper Submission Deadline June 15, 2011
Author's Registration June 15, 2011
ICCCT 2011 Conference Dates September 15 - 17, 2011

Contact Us

Prof. (Dr.) A. K. Misra
Computer Science and Engineering Department
M.N.N.I.T., Allahabad (U.P.),
INDIA
General Chair, ICCCT 2011
Email: iccct2011@gmail.com
akm@mnnit.ac.in
Phone: +91-532-2271650(Office)
Fax: +91-532-2545341

for more info visit.
http://www.enjineer.com/forum

First International Conference on Modern Trends in INSTRUMENTATION & CONTROL 2011 At PSG College of Technology, Coimbatore

First International Conference on Modern Trends in INSTRUMENTATION & CONTROL 2011 At PSG College of Technology, Coimbatore

About The Conference

International Conference on Modern Trends in Instrumentation and Control 2011 (ICIC'11) is intended to bring to light the state of art of research results, to disseminate knowledge, to exchange ideas between academic community and industrial organizations and to perceive future developments relevant to Instrumentation and Control Engineering.
ICIC'11 provides the forum for researchers, engineers and academia to exchange the latest information about instrumentation and control concepts and applications, experiences from existing deployment, current developments and future evolution.

Conference Proceedings

Those papers recommended by the Review Committee and registered on or before August 6, 2011 will be published in the conference proceedings, which will be made available during the conference.

About the Department of Instrumentation and Control Systems Engineering

The Department of Instrumentation and Control Systems Engineering, established in the year 2007, strives towards becoming a trend setter and a facilitator in Electronics, Instrumentation and Control Engineering for higher learning, research and consultancy. The department aims to become a preferred partner to the industry and community for contribution towards their economic and social development by providing high quality manpower with sound technical knowledge, professional skills and ethical values.

Call for Papers

The First International Conference on Modern Trends in Instrumentation and Control 2011 (ICIC'11) solicits innovative research papers on Instrumentation and Control. Topics of interest include, but are not limited to the following :

Instrumentation

Biomedical Instrumentation, Environmental Instrumentation, Instrumentation for Defense and Atomic Energy, Optical and Analytical Instrumentation, Smart Sensors, Safety Instrumentation System, Data Fusion, Virtual and Intelligent Instrumentation, Industrial Automation and Process Control, Instrumentation Standards and Protocols, MEMS and
Nano Sensors.

Control

Linear and Nonlinear control, Multivariable control, Model Predictive control, Robust control, Network control, Intelligent control, Process control, System Theory, Hybrid and Discrete Event Systems, Identification & Filtering, Robotics, Signal Processing and Fault Diagnosis.

Submission of papers

The full paper submission will be peer reviewed and evaluated based on originality, technical and/or research content/depth, correctness, relevance to conference, contribution, and readability. The accepted full
paper will be published in the conference proceeding. Prospective authors are kindly invited to submit full text papers including results, tables, figures and references in IEEE format. Full text paper will be accepted only by
electronics submission in word document. Extended version of the selected papers will be published in the International Journal on Smart Sensing and Intelligent Systems.

Important Dates

Full Manuscript : June 15, 2011
Intimation of Acceptance : July 15, 2011
Final Paper Submission & Registration for Authors : July 30, 2011
Registration closes on : August 20, 2011

Registration Fee

Oversea Delegates Indian Delegates
Academia 100 USD Rs. 2000
Industry/ R&D 200 USD Rs. 3000
Students 50 USD Rs. 1000
Accompanying Guest/Spouse 50 USD Rs. 1000

Registration fee includes Conference Kit, a copy of the Proceedings, Souvenir, Food and Banquet. However, accompanying guests/spouse cannot avail the conference kit and the copy of the proceedings. Registration Fee

Mode of Payment

Indian Delegates : The registration fee is to be paid by Demand Draft drawn in favour of "Organizing Secretary, ICIC'11”, PSGCT, payable at Coimbatore. Overseas Delegates : Overseas delegates can pay the Registration fee by International Bank Transfer to “Organizing Secretary, ICIC'11”, A/c Number : 3075062800, Central Bank of India, Peelamedu,
Coimbatore, TamilNadu, India. The swift code is CBININBBAMDR.

Accommodation

A wide range of Hotel Accommodation is available in Coimbatore city, close to the venue of the conference Limited accommodation is also available at the college guest house on a chargeable basis. Request for the same should be made in advance. For more details please visit www.psgtech.edu.

Contact Us

The Organising Secretary, ICIC'11,
Department of Instrumentation and Control Systems Engineering,
PSG College of Technology, Coimbatore 641004,
Tamilnadu, India.
Phone : 0422 2572177, 4344777 Extn : 4256
Fax : 0422 2573833
Email : icic11@ice.psgtech.ac.in

for more info visit.
http://www.enjineer.com/forum

First National Conference on ENERGY EFFICIENT MECHANICAL SYSTEM DESIGN AND MANUFACTURING At PSG College of Technology, Coimbatore

First National Conference on ENERGY EFFICIENT MECHANICAL SYSTEM DESIGN AND MANUFACTURING At PSG College of Technology, Coimbatore

About the CONFERENCE

Indian economy is booming and the sustained double digit economic growth provides adequate impetus and encouragement to manufacturers of energy efficient equipment and systems. The Indian government is striving to accelerate the market shift to energy efficient products and appliances. The efficiency improvements in mechanical systems will be critical to restraining growth in energy consumption and emissions. In this context, there is a strong need to develop technologies to bring out energy efficient mechanical engineering products and systems. The conference aims to address the aforesaid issues by providing a platform for the exchange of innovative ideas and information on recent
advances in energy efficient mechanical system design and manufacturing among the researchers, academicians and executives of industry. The technical sessions of the conference will comprise of invited lectures by eminent speakers and oral and poster presentation by delegates. A special feature of the conference is the workshop wherein
the tools for product development including case studies will be presented.

About the WORKSHOP

The focus of the workshop will be on

· Advanced engineering analysis using FEM
· Simulation of plastic injection moulding process using Moldex3D
· PC based integration of sensors/actuators for automation of mechanical systems

Call for TECHNICAL PAPERS

The organizing committee of the conference invites papers from researchers, faculty and students in the following areas and related topics:

Product Design Engineering
Green Design and Manufacturing
CAD/CAM/CAE/CIM
Finite Element Analysis
Computational Fluid Dynamics
Optimization Techniques
Advanced Materials
Composite Materials
Precision Machine Design
Design of Experiments
Mining Engineering
Modern Machining Processes
Rapid Prototyping
Industrial Automation
Applied Metal Forming
Robotics
Quality Engineering
Industrial Systems
Lean Manufacturing
Reliability Engineering
Alternate Energy Systems
Alternate Fuels
Energy Management

Submission of PAPERS

The full paper submitted will be peer reviewed and evaluated based on originality, technical and/or research content/depth, correctness, and relevance to conference. The accepted full paper will be published in conference proceedings. Prospective authors are invited to submit full text papers including results, tables, figures and references in IEEE format (www.ieee.org). Full text paper will be accepted only by electronic submission as word document. Selected papers shall be considered for publication in National Journal of Technology.

Dates to REMEMBER

Last date for submission of manuscript for review : 11.01.2011
Confirmation of acceptance of the paper : 02.02.2011
Final submission of accepted paper for inclusion in the proceedings : 16.02.2011
Last date for registration : 23.02.2011

Registration FEE

1000/- per delegate from academic institutions
2000/- per delegate from industries
750/- for student /spouse/guest

Mode of PAYMENT

The registration fee is to be paid by Demand Draft drawn in favour of “EMSDM 2011, PSG CT” payable at Coimbatore.

ACCOMMODATION

Limited accommodation would be made available in college campus on prior intimation.

Address for Correspondence:

Organizing Secretary, EMSDM
Department of Mechanical Engineering
PSG College of Technology
Coimbatore- 641 004, Tamilnadu, India
Phone : +91422 - 4344252, 2572177, 4344177
Fax : +91422 - 2592277
Website : http://www.psgtech.edu
E-mail : emsdm11@gmail.com

for more info visit.
http://www.enjineer.com/forum

National Conference on Refrigeration and Air Conditioning 2011 At Indian Institute of Technology, Madras

National Conference on Refrigeration and Air Conditioning 2011 At Indian Institute of Technology, Madras

About the Conference

Aspirations and needs of mankind are ever growing, and so also the need for refrigeration and air conditioning (RAC). Now it is an important aspect of human life including essential applications from submarines to airplanes, underground mines to space, comfort purpose to manufacturing industries. The importance of ‘cold chain’ in the national food security has now been recognized. In the recent years, RAC industry recorded an annual growth of over 25 % in India, next only to Information Technology and Automobile sectors. However, RAC is also an energy guzzler accounting to nearly one sixth of the world energy consumption. Even though the objective of Montreal Protocol governing the ozone depletion is nearly met, those of Kyoto Protocol centered on the emissions leading to Global Warming are yet to be realized. Thus both energy and environmental aspects play an important role in the development of RAC sector world over.
The National Conference on Refrigeration and Air Conditioning (NCRAC-2011) is scheduled to be held during 21 – 23 July 2011 at IIT Madras. The Conference aims to bring together leading experts in the field from academia, industry and consultancy from all over India. It provides a platform to discuss the latest trends and ongoing research,and share/disseminate the knowledge, thereby popularizing the subject amongst budding engineers and scientists. The conference offers an excellent opportunity to exchange information amongst researchers working in Academic Institutions / R&D organizations, to present and publish research findings and interact with the experts.

TOPICS

The conference will cover all areas of Refrigeration, Air Conditioning and Indoor Air Quality, including:

1. RAC components, standards and test facilities
2. CFD simulation and modeling in RAC
3. Natural / New refrigerants and mixtures
4. Sorption cooling and heating systems
5. Desiccant and evaporative cooling
6. Novel/alternate systems
7. Poly-generation
8. Refrigerated cold chain, transport, and cold storage
9. Heat and Mass transfer in RAC systems
10. Cold/heat recovery and energy efficiency
11. Low temperature applications
12. Automobile air conditioning
13. Green buildings
14. Indoor air quality management
15. District heating/cooling
16. Building services and automation
17. Industrial ventilation
18. Acoustics and noise control
19. Smoke and fire controls in RAC
20. Solar cooling techniques

Important Dates

1. Abstract (250 words) 20th December 2010
2. Abstract acceptance notification to authors 31st January 2011
3.Manuscript of full paper 31st March 2011
4.Paper acceptance/revision notification to authors 15th May 2011
5.Submission of revised paper 15th June 2011
6.Conference dates 21-23 July 2011

REGISTRATION FEE

Delegates Rs. 5000/-
Authors/ISHRAE / ASHRAE Members Rs. 3000/-
Students Rs. 1500/-

REGISTRATION FORM

Paper Submission

Authors intending to present papers must submit a short abstract of 250 words to NCRAC2011@iitm.ac.in.
Upon acceptance of the abstract, authors are required to send the full paper for peer review by the Technical Committee.

Contact Persons

Prof. M. P. Maiya
Chairman,NCRAC2011
Refrigeration & Air Conditioning
Laboratory Department of
Mechanical Engineering
IIT Madras,
Chennai – 600036
Phone : (044) 2257 4665 (D) 5720 (O)
FAX: (044) 2257 4652, 0545, 0509
Email:NCRAC2011@iitm.ac.in

Dr. Shaligram Tiwari
Treasurer,NCRAC2011
Refrigeration & Air Conditioning
Laboratory Department of
Mechanical Engineering
IIT Madras,
Chennai – 600036
Phone : (044) 2257 4729 (D)
FAX: (044) 2257 4652,
Email:NCRAC2011@iitm.ac.in

for more info visit.
http://www.enjineer.com/forum

National Management Convention “The Business of Innovation” At Kalinga Institute of Industrial Technology, Bhubaneshwar

National Management Convention “The Business of Innovation” At Kalinga Institute of Industrial Technology, Bhubaneshwar

Call for Papers

“Great innovations should not be forced on slender majorities”…………….Thomas Jefferson. Indeed, it is those few with great ideas who make all the difference to the world we live in today. “Innovation” is what distinguishes a leader from followers. It is also a great leveler, as no particular entity has a monopoly over it or is endowed with a greater ability to
innovate. As the world gets more connected, businesses are getting increasingly competitive. Access to capital is easier, Human Resources are more mobile, Technology has done away with several barriers to business, greater availability of information has made customers more sophisticated and environmental sustainability has assumed much greater
proportion in business decisions. In such a scenario, to stay relevant and profitable, businesses world over have to
constantly re-think their business models to tweak their products, services, delivery and internal processes. However, this is easier said than done. To make matters complex, in the context of business, Innovation that is not profitable or sustainable may not find takers. What the KIIT School of Management National Management Convention on
the “Business of Innovation” aims to do is:

• Shed more light on innovations that makes sense in the current business landscape
• Provide insights on how to make sustainable and profitable innovations The papers should be original research work discussing new ideas, concepts, and paradigms on the above topic and could either be empirical or theoretical work based
on the following subthemes.

Subthemes

• Outsourcing Innovation: Making customers and stakeholders partners
• Creating an entrepreneurial work environment
• Emerging media and new marketing paradigms
• Banking the unbanked: Innovation in financial product design and delivery
• Process Excellence: Making organizations ready for the next decade
• Policy challenges for inclusive growth
• Portfolio Mix and Financial Risk Management
• Innovative practices in Corporate Governance

Who Can Participate

Professionals from Manufacturing and Service Sectors, Academicians, Research Scholars, Consultants, Students and anyone who has a specific interest in the above theme / subthemes.

Submission of Abstracts

Selection of Papers would be based on Abstracts detailing the purpose of the research, methodology, important conclusions / outcomes and key references. The guidelines for Abstract submission are given below.

• The Abstract should be submitted along with a Title Page and should not exceed 500 words, excluding the Title Page and References.
• The Title Page should clearly highlight the Author’s name, Affiliation & Contacts(including Institute/Organization name, City and Postal Address) and e-mail address in Proper Case.
• It should have 3 to 6 Keywords.
• Except for the Title Page, the name of the Author(s) should not appear in any other page of the Abstract.
• The Title page and the Abstract should be typed in ‘Times New Roman’ style, with font size 12, 1.5 lines space between lines and 70 point margin on all sides.
• The Abstract submission should be accompanied by a statement confirming that the work for which the Abstract is being submitted represents the Author’s original work. A soft-copy of the Abstract needs to be mailed to nmc2011@ksom.ac.in so as to get delivered on or before 30th December 2010. The Abstracts would be blind-reviewed and the decision of the reviewing committee on papers to be selected for the Convention would be final. Decision of the reviewers on the acceptability of the Abstract would be communicated by 7th January 2011.

Submission of Papers

Both a PDF and a Microsoft Word version of the paper selected for the Convention should be sent to mc2011@ksom.ac.in so as to reach on or before 25th February, 2011. Following are the submission guidelines:

• The Paper should not exceed 6000 words excluding Title Page, Illustrations and References.
• The Paper should be typed in ‘Times New Roman’ style, with font size 12, 1.5 lines space between lines and 70 point margin on all sides.
• For Papers to be included in the Convention proceedings, at least one of the authors must register for the Convention and present the paper.
• The Paper should follow the Referencing Style give below:

Article

• M. Plancherel, Sur les formules de réciprocité du type de Fourier, J. London Math. Soc., Ser. 1, 8 (1933) 220–226.

Authored book

• J. N. Pandey, The Hilbert Transform of Schwartz Distributions and Applications (Wiley-Interscience, New York, 1996), pp. 54–87.

Review volume

• S. R. Long and N. E. Huang, On the normalized Hilbert transform and its applications in remote sensing, in Signal and Image Processing for Remote Sensing, ed. C.-H. Chen (CRC Press, Boca Raton, 2007), pp. 3–24.

Proceedings

• A. Dasgupta and Y. Nakamura, Making feasible walking motion of humanoid robots from human motion capture data, in IEEE Int. Conf. Robotics and Automation (ICRA) (IEEE Press, Detroit, USA, 1999), pp. 1044– 1049.

The papers will be published in an edited volume and shared with the participants. Submission of a Paper for the Convention would amount to the Author(s) agreeing to transfer the Paper’s copyright to KIIT School of Management.

Best Paper Award

Award for the best paper(s) will be chosen by a panel of experts. The Award will be announced on the last day of the Convention, 5th March 2011. Participation certificates will also be distributed on the same day.

Criteria for Paper Review / Evaluation

• Relevance of Purpose: Is the purpose of the paper relevant to the industry?
• Depth of Research: How comprehensive is the study, including that of any previous work in the same area?
• Extent of Originality: How original is the idea?
• Practical Applicability: Are the conclusions practical? Can they be implemented?
• Justifiability of Conclusions: Do the study and discussion adequately justify the conclusion?
• Structure and Organization: Is the report properly and logically structured?
• Quality of References: Are the sources credible?
• Adherence to Guidelines: Has the report adhered to the guidelines laid out in this document?

Registration and Payment Details

Participants / Sponsoring Authorities in organizations need to register for the programme by filling up the attached Registration Form. The form can also be downloaded from the website www.ksom.ac.in (Academic > Events > Forthcoming).

The table below shows the Registration Fees, which includes in-campus accommodation (on twin-sharing basis), Convention kit, lunch, dinner and light refreshments during the course of the event.

Delegate Category Fees Per Delegate

Corporate Executive 4,500
Academician 3000
Research Scholar 1000
Student 500

The fee is to be paid in the shape of a Local or At Par Cheque or a Demand Draft drawn in favor of “KIIT School of Management” payable at Bhubaneswar. The Payment Instrument and the filled up Registration Form should reach KIIT School of Management on or before 25th February 2011.

Important Dates

Submission of Abstracts December 30, 2010
Intimation of Acceptance of Abstracts January 7 , 2011
Submission of Full Paper February 25, 2011
Registration February 25, 2011
Convention Dates March 3-5, 2011

Convention Contacts

NMC Coordinator
Prof. Anandadeep Mandal
Mob. 97761 87712

Members Prof. Ashutosh Kar
Prof. Manoj Sahoo
Prof. Saroj Routray
Prof. Snigdha Tripathy

NMC Executive
Ms. Priyanka Hazra
Mob. 99371 57543

Address all Correspondence to:

NMC Coordinator
KIIT School of Management,
Campus-7, KIIT University,
Bhubaneswar, India
Email: nmc2011@ksom.ac.in
Phone: 0674 - 2375700,
2375780
Tel (Fax): 0674 - 2725278

for more info visit.
http://www.enjineer.com/forum

National Conference on Emerging Trends in Mechanical Engineering (ETME - 2011), At G H Patel College of Engineering & Technology, Vallabh Vidyanagar,

National Conference on Emerging Trends in Mechanical Engineering (ETME - 2011), At G H Patel College of Engineering & Technology, Vallabh Vidyanagar, Gujarat

Conference Theme

The basic objective of the conference is to illustrate the emerging trends in the field of Mechanical Engineering. The topics covered are from the wide spectrum of Mechanical Engineering, such as, Design, Manufacturing, Metallurgy, Industrial Engineering, and Mechatronics, Thermal Science and Engineering and Managerial aspects of engineering. The conference aims to provide common platform to academicians, industrialist, research scholars and students to exchange their expertise and knowledge. 21st century is the century of knowledge and academicians have a vital role to play in this era to promote and enhance the knowledge among the society, nation and globe as a whole. For spreading knowledge, it is quite essential to share the same among intellectual mass of people and such conferences can definitely prove to be one of the effective means for the same.

Conference Topics

The conference topics include, but not limited to, following broad fields of Mechanical Engineering. Any relevant topics contributing to the main theme of the conference are welcome.

The conference topics are:

* Design Engineering
* CAD / CAM / CAE
* Robotics, Automations & Artificial Intelligence
* Manufacturing Engineering
* Material Science & Metallurgy
* Product Design & Development
* Industrial Engineering & Management
* Energy Conservation & Management
* Thermal Science & Engineering
* Computational Fluid Dynamics

Important Dates

Submission of full paper: 15th January, 2011
Notification of acceptance: 15th February, 2011
Last date of registration: 25th February, 2011

Registration Fees

The selected participants should registered by sending the duly filled registration form along with the registration fee on or before 25/02/2011.

Fee structure:

Category Fee (Per person / paper)

A) Person from R & D Organization & Industry Rs. 2,000/-
B) Faculty members Rs. 1,200/-
C) P.G. & Ph.D. Students Rs. 1,000/-
D) U.G. Students Rs. 800/-

Registration fee should be sent by Demand Draft in favour of “The Principal, GCET”, payable at Vallabh Vidyangar to the organizing secretary at the address mentioned below.

Organizing Secretary ETME-2011
Department of Mechanical Engineering,
G H Patel College of Engineering and Technology,
Bakrol Road, VALLABH VIDYANAGAR – 388 120 Dist.: Anand, Gujarat.

Important Instruction:

Maximum three authors are allowed per paper. Registration kit and certificate of presentation will be given to the registered authors only who will remain present physically and will present their paper in the conference.

REGISTRATION FORM

Author & Submission Guidelines

Only original papers that have not been published or submitted for publication elsewhere can be submitted. All papers will be peer reviewed on the basis of originality, technical depth, content & relevance to conference theme. The authors are required to submit the full length paper including text, figures, graph, tables, references etc. not exceeding 6 pages. The paper should be in MS-word and strictly as per the format available on the website. Abstract should not exceed 250 words. Submit full length paper by email at: etme2011@gmail.com. After intimation of acceptance, hard copy of the final paper should be submitted to the organizing secretary at the following address along with the registration form and fees.

Organizing Secretary – ETME 2011,
Department of Mechanical Engineering,
G H Patel College of Engineering and Technology
Bakrol Road, Vallabh Vidyanagar – 388 120, Dist.: Anand, Gujarat.

Contact Us

G H Patel College of Engineering & Technology
Bakrol Road,
Vallabh Vidyanagar, 388 120.
Gujarat. India.
Ph. No: +91-2692-231651
Fax No.: +91-2692-236896
E-Mail: principal@gcet.ac.in

for more info visit.
http://www.enjineer.com/forum