Current Opening At Petron Engineering Construction Ltd

Current Opening At Petron Engineering Construction Ltd

Position: Design - Instrumentation Engineer
Location: Mumbai.
Qualifications: BE Electrical/ Instrumentation
Experience: 8-10yrs

Profile:
* Instrument index, Instrument datasheets & specs for all instruments on fuel skids, heater and its ancillaries per P&IDs Datasheet and spec for Aircraft warning light w/ its control panel.
* Loop diagram, ladder logic, Loop schematics etc
* Design of wiring/cabling for all instruments / electrical item up to Junction box and within junction box
* Review of work done by instrumentation detailing contractor (including wiring/cabling drawings)
* Material Requisition & BOM of all instruments on fuel skid, heater and stack
* Fully conversant with Foundation Field bus instrumentation and INTOOLs
* Design & Material Requisition for Burner Management System (including PLC), Burner / Soot blower local control panel etc.
* Material Requisition for all instruments (including Tube Skin Thermocouples, Damper with its pneumatic actuator etc.) and electrical items (motors, VFD etc).
* Review of offers and post order vendor documents received for above items.
* Support “Proposal” department in pre-bid engineering & MTO estimation.

Position: Fired Heater (Mechanical) Engineer
Location: Mumbai
Qualifications: BE Mechanical
Experience: 7-12yrs

Profile:
* Pressure parts calculations per API 530, ASME Sec I, ANSI B31.3, ANSI B31.1, IBR etc.
* Radiant & convection Tube support calculations & design drawings.
* Overall plot plan considering project specs, national/international codes / standards.
* Development of Mechanical General Arrangement drawings for Heater / Stack (including flue gas ducts, duct supporting structure, stair, ladders & platform) from Heater datasheets & sketches given by Thermal Engineering Group.
* Development of General Arrangement and fabrication drawings for Heater Coil including welding details.
* Refractory design drawings (including BOM) for heaters, ducts and stack.
* Material Requisition for plain pipe, studded / finned pipes, fitting, flanges, botlings, gaskets, tube supports, tube seal, expansion joints, guillotine blinds etc.
* Material Requisition for Burners, Air Preheater, Steam Air Preheater, ID/FD Fans, Soot blowers, Dampers etc.
* Review of offers and post order vendor documents received for above items.
* Provide “Proposal” department pre-bid support in material estimation for pressure parts, tube supports etc.

Position : Design – Structural Engineer
Location: Mumbai
Qualifications: BE Mechanical/ Civil / Structural
Experience: 8-10yrs

Job Description:
* Complete structural design (including determination of primary & secondary members) & modeling of Fired Heater System including heater w/ its platforms, APH/SAPH, ID/FD Fans, Flue gas / Combustion air Ducts and Duct Support Structure etc in STAAD-Pro software.
* Foundation loading calculation for heater, stack, APH/SAPH, ID/FD Fans, pipe racks and duct supporting structure.
* Generation of Foundation Loading Diagram and Base plate drawings for heater and its ancillaries.
* Lifting and transportation analysis and drawings showing transportation saddles, shipping lugs, bracing, spider beam etc.
* Co-ordination and review of work done by Structural detail engineering firm generating steel drawings and fabrication drawings for heater and all its ancillaries.
* Erection drawing & erection sequence.
* Co-ordinate and advise fabrication shop and construction site on all issues related to structural engineering.
* Support “Proposal” dept to generate preliminary steel design and structural estimates.

Remuneration for all posts will be corresponding with qualifications & experience. Interested candidates may mail their resume with current & expected salary and a passport size photograph super scribing the post applied for, within 7 days, to our office address.

You can E-mail us at hr@petronengineering.com or Submit your Resume Online

Contact Us

Corporate Office
MUMBAI
Petron Engineering Construction Limited
6th Floor, Swastik Chambers, Sion-Trombay Road, Chembur,
Mumbai 400 071, India.
Tel: +91-22-40856400 / 40856200
Fax: +91 – 22 – 40856250 / 67973509

for more info visit.
http://www.enjineer.com/forum