Current Opening At Guru Nanak Dev Engineering College, Ludhiyana
Career Opportunities
for dedicated persons having passion for teaching and research
for the following faculty positions :-
Professors: Mechanical, Production, Electrical, Electronics & Communication, Computer Science & Engg., Information Technology
Associate Professors: Electronics & Communication, Electrical, Computer Science & Engg., Information Technology, Civil
Assistant Professors: Civil, Mechanical, Production, Electrical, Electronics & Communication, Computer Science & Engg., Information Technology, Mathematics, Chemistry, Physics
Pay scales and eligibility as per AICTE / UGC / Punjab Government norms applicable to Engineering Colleges. Application forms, terms & conditions and other details are available on http://gndec.ac.in/jobs only. Completed application forms along with DD of Rs. 400/- for general category candidates and Rs. 200/- for SC / ST candidates respectively may be submitted by 11.07.2011 in the office of Administrative Officer .
(Dr. M.S. Saini)
Director
Application Form
Terms and conditions
1. Candidates in service should submit applications through proper channel. However they can send an advance copy along with requisite fee and attested photo copy of certificates and can produce NOC at the time of interview.
2. The number of posts shall be decided depending on requirement / norms at the time of interview.
3. The college reserves the right to fill or not to fill any or all of the above posts.
4. Applications must reach by 11.07.2011 (5.00 PM) by all means and the college will not be responsible for non-receipt / late receipt of applications due to any postal delay.
5. Passing in Punjabi Subject of matric standard is essential for all the above posts.
6. Candidates having experience of working in Engineering / Technical Institution may be preferred.
7. Incomplete applications will be rejected without entering into any correspondence.
8. Candidates must write name of the department, post applied & category on top of the envelope.
9. Reservation as per Punjab Government norms shall be followed.
10. The Director can place before the Selection Committee names of suitable persons for its consideration along with the applications received in response to the advertisement.
11. If any information supplied by the candidate in his application form is found to be incorrect / false at any stage, his candidature / selection will stand cancelled.
12. The post of Assistant Professor can be filled either as regular post / and / or on contract.
13. The interviews for higher posts may be conducted at an appropriate time after its due approval by governing body.
14. Applying for a post does not guarantee a call for interview. Only short listed candidates shall be called.
15. In case suitable candidate is not found for a higher post, it may be filled at a lower level on contract.
Contact Us
Dr. M.S. Saini
director@gndec.ac.in
Phone No. 0161-2490339, 2502700
Fax No. 0161-2502240
Guru Nanak Dev Engineering College
Gill Park
Ludhiana 141006
Punjab (India)
website: http://www.gndec.ac.in/?q=node/137
Download full seminar papers At
http://www.enjineer.com/forum
Wednesday, July 6, 2011
Tuesday, July 5, 2011
one day National Level Seminar on “Applications of Polymer Nanocomposite Materials in various fields” At Kongu Engineering College, Erode, Perundurai,
one day National Level Seminar on “Applications of Polymer Nanocomposite Materials in various fields” At Kongu Engineering College, Erode, Perundurai, Tamilnadu
PROLOGUE
The research on nanomaterials expanded so fast and now it is one of the most popular research topics among the scientists and engineers due to their variety of structures, interesting properties, as well as high technological applications in electronics, catalysis, pharmaceutics, biology and so forth. Polymers today find
applications in nearly every industry and area of life. The polymer nanocomposites have been the staple of modern polymer industry and the development of polymer nanocomposites is rapidly emerging as a multidisciplinary research activity since the results could broaden the applications of polymers to the great benefit of many different industries.
Polymer nanocomposites are a unique new class of materials with an ultrafine dispersion of nanomaterials in a polymeric matrix. With much superior properties, they show a lot of promise in developing a wide range of advanced products. The applications can be in domains such as biomedical, electronics, sensors, energy, automotive, sports gear, medical, defence, textile, cosmetics, construction, gas barrier, flame retardants,
packaging and also aircraft and aerospace engineering besides a range of smart and intelligent products. The main objective of this seminar is to provide academicians, researchers and students to gain immense knowledge about the applications of polymer nanocomposite materials in various fields.
RESOURCE PERSONS
Sessions will be handled by experienced academicians and scientists from various institutions.
ELIGIBILITY FOR PARTICIPANTS
Faculty from various educational institutions, industries and R & D organizations with relevant background.
HOW TO APPLY
The applicants should send their applications in the specified format through the Head of the Institution to reach us on or before 12.07.2011. If selected, they should confirm their participation in time through mail.
IMPORTANT DATES
Last date for receipt of applications : 12.07.2011
Intimation of selection through e-mail : 13.07.2011
Confirmation by participants through e-mail : 14.07.2011
Application form completed in all respects is to be sent to
Dr. P. N. Palanisamy
Convenor - APNM-2011
Department of Chemistry
School of Science & Humanities
Kongu Engineering College
Perundurai,Erode – 638 052,Tamilnadu
Download full seminar papers At
http://www.enjineer.com/forum
PROLOGUE
The research on nanomaterials expanded so fast and now it is one of the most popular research topics among the scientists and engineers due to their variety of structures, interesting properties, as well as high technological applications in electronics, catalysis, pharmaceutics, biology and so forth. Polymers today find
applications in nearly every industry and area of life. The polymer nanocomposites have been the staple of modern polymer industry and the development of polymer nanocomposites is rapidly emerging as a multidisciplinary research activity since the results could broaden the applications of polymers to the great benefit of many different industries.
Polymer nanocomposites are a unique new class of materials with an ultrafine dispersion of nanomaterials in a polymeric matrix. With much superior properties, they show a lot of promise in developing a wide range of advanced products. The applications can be in domains such as biomedical, electronics, sensors, energy, automotive, sports gear, medical, defence, textile, cosmetics, construction, gas barrier, flame retardants,
packaging and also aircraft and aerospace engineering besides a range of smart and intelligent products. The main objective of this seminar is to provide academicians, researchers and students to gain immense knowledge about the applications of polymer nanocomposite materials in various fields.
RESOURCE PERSONS
Sessions will be handled by experienced academicians and scientists from various institutions.
ELIGIBILITY FOR PARTICIPANTS
Faculty from various educational institutions, industries and R & D organizations with relevant background.
HOW TO APPLY
The applicants should send their applications in the specified format through the Head of the Institution to reach us on or before 12.07.2011. If selected, they should confirm their participation in time through mail.
IMPORTANT DATES
Last date for receipt of applications : 12.07.2011
Intimation of selection through e-mail : 13.07.2011
Confirmation by participants through e-mail : 14.07.2011
Application form completed in all respects is to be sent to
Dr. P. N. Palanisamy
Convenor - APNM-2011
Department of Chemistry
School of Science & Humanities
Kongu Engineering College
Perundurai,Erode – 638 052,Tamilnadu
Download full seminar papers At
http://www.enjineer.com/forum
Three Day National Conference On Advanced Control in Engineering Systems At M.S. Ramaiah Institute of Technology, Bengaluru
Three Day National Conference On Advanced Control in Engineering Systems At M.S. Ramaiah Institute of Technology, Bengaluru
Objective of the Conference
The main objective of the National Conference on Advanced Control in Engineering Systems is to bring together the community of researchers, teachers and practitioners to present and discuss new research results, perspectives on future developments and new applications to control problems in wide variety of engineering systems. This theme attains a special significance due to the fact that in the
country there are several Industrial and Systems related technological projects which need and use advances made in the field of Control, Electrical and Instrumentation Engineering. The technical program will consist of papers in regular technical sessions, and some plenary lectures. The engineering system could be Industrial Automation, Control of Biomedical, Robotic, Aerospace and Energy Systems
Call for papers
Prospective authors are kindly invited to submit original and unpublished research papers for resentation. Topics include, but are not limited to:
AI based process control and automation.
Neuro fuzzy and adaptive control & estimation
AI based power system analysis and control
Control in manufacturing automation
Energy audit and management
Aerospace control and instrumentation
Power electronics and industrial drives
AI based robotics and mechatronics
Micro and Nano systems
Automative instrumentation and control
HVDC and FACTs
Multi-sensor data fusion
Automation for renewable energy systems
Power quality
Smart power grids
Bio-medical engineering systems
Electric Vehicles
Guidelines to Authors
Authors are requested to submit the full length research paper in MS Word along with author details by email to naces11.msrit@gmail.comPaper format: IEEE format (double column, single line
spacing), A4 size not exceeding 4 pages Font type: Times New Roman, Font size: Title: 14, Text: 10
Important Dates
Submission of full paper : July 31, 2011
Notification of Acceptance : Aug 20, 2011
(Through email only)
Last Date of Registration : Aug 30, 2011
Submission of Camera Ready Copy : Aug 30, 2011
Registration Fee
The registration fee covering the cost of conference registration kit & participation in conference activities including lunch and intersession tea is as under .
Industrial /Corporate Sectors : Rs. 1500
Teaching Institutes/Research Organizations : Rs. 1000
P .G student/Research scholars : Rs. 500
Payment to be made in the form of D.D, drawn in favour of: “MSRIT Golden Jubilee” payable at Bangalore.
Note: Accommodation can be arranged in nearby hotels on prior request by remitting an advance amount along with the registration fee. Please contact us through mail for further details.
Contact details
Ms. T .V. Snehaprabha: 91-9742876078, 9986370863
Mr . A. Ramachandran: 91-9448119068
Email: naces11.msrit@gmail.com
Download full seminar papers At
http://www.enjineer.com/forum
Objective of the Conference
The main objective of the National Conference on Advanced Control in Engineering Systems is to bring together the community of researchers, teachers and practitioners to present and discuss new research results, perspectives on future developments and new applications to control problems in wide variety of engineering systems. This theme attains a special significance due to the fact that in the
country there are several Industrial and Systems related technological projects which need and use advances made in the field of Control, Electrical and Instrumentation Engineering. The technical program will consist of papers in regular technical sessions, and some plenary lectures. The engineering system could be Industrial Automation, Control of Biomedical, Robotic, Aerospace and Energy Systems
Call for papers
Prospective authors are kindly invited to submit original and unpublished research papers for resentation. Topics include, but are not limited to:
AI based process control and automation.
Neuro fuzzy and adaptive control & estimation
AI based power system analysis and control
Control in manufacturing automation
Energy audit and management
Aerospace control and instrumentation
Power electronics and industrial drives
AI based robotics and mechatronics
Micro and Nano systems
Automative instrumentation and control
HVDC and FACTs
Multi-sensor data fusion
Automation for renewable energy systems
Power quality
Smart power grids
Bio-medical engineering systems
Electric Vehicles
Guidelines to Authors
Authors are requested to submit the full length research paper in MS Word along with author details by email to naces11.msrit@gmail.comPaper format: IEEE format (double column, single line
spacing), A4 size not exceeding 4 pages Font type: Times New Roman, Font size: Title: 14, Text: 10
Important Dates
Submission of full paper : July 31, 2011
Notification of Acceptance : Aug 20, 2011
(Through email only)
Last Date of Registration : Aug 30, 2011
Submission of Camera Ready Copy : Aug 30, 2011
Registration Fee
The registration fee covering the cost of conference registration kit & participation in conference activities including lunch and intersession tea is as under .
Industrial /Corporate Sectors : Rs. 1500
Teaching Institutes/Research Organizations : Rs. 1000
P .G student/Research scholars : Rs. 500
Payment to be made in the form of D.D, drawn in favour of: “MSRIT Golden Jubilee” payable at Bangalore.
Note: Accommodation can be arranged in nearby hotels on prior request by remitting an advance amount along with the registration fee. Please contact us through mail for further details.
Contact details
Ms. T .V. Snehaprabha: 91-9742876078, 9986370863
Mr . A. Ramachandran: 91-9448119068
Email: naces11.msrit@gmail.com
Download full seminar papers At
http://www.enjineer.com/forum
Monday, July 4, 2011
5th National Power Electronics Conference 2011 At Bengal Engineering & Science University, Shibpur, Howrah, Wesh Bengal
5th National Power Electronics Conference 2011 At Bengal Engineering & Science University, Shibpur, Howrah, Wesh Bengal
National Power Electronics Conference 2011
The National Power Electronics Conference 2011 (NPEC 2011) is the 5th biennial conference of the Power Electronics community in India, focusing on the ongoing research in this area and seeking to find potential users of the laboratory-scale developments in industry. Launched in 2003 October at IIT Bombay, it was biennially held at IIT Kharagpur in December 2005, at IISc Bangalore in December 2007, at IIT Roorkee in June 2010. The present version of NPEC will be held in December 2011.
The objectives of the conference are to provide a forum to promote and accelerate high quality research inviting professional interactions for the advancement and indigenisation of Power Electronics in India. Papers with up-to-date research results are encouraged for submission. Specifically, papers having significant experimental results to validate the propositions will be given preference. Technical papers will be accepted for presentation after peer review. The pre-conference tutorials will be held on December 19, 2011. Apart from these plenary sessions, keynote lectures and invited talks will also be held.The country’s industry, research establishments and academia are cordially invited to participate in the paper presentations, tutorials, special sessions, exhibitions and social activities, and enjoy the hospitality of the 155-year old engineering institution which was the mother of the entire planning and implementation of IIT system in India.
Located flush on the banks of the river Hooghly, the erstwhile Bengal Engineering College (or B.E. College) presently stands as Bengal Engineering and Science University, Shibpur, Howrah. Sprawling over 170 acres of lush and varied greenery (being a part of the Indian Botanic Garden, 155 years ago) it has 7 halls of residence, 8 hostels, 2 of the best and biggest campus based playgrounds in eastern India. It has too many dwindling ingredients of “the Raj days”. Historic buildings, the celebrated clock-tower, the lush greenery and the cool river breeze - all cast a spell. It is 45 minutes drive from the Dum Dum Airport, 15 minutes from the Howrah railway terminus, 30 minutes from the Sealdah railway terminus and 20 minutes from the Kolkata City centre. The new railhead at Shalimar is 2 minutes drive from the campus. It is also in the fitness of things, that the Department of Electrical Engineering is simultaneously celebrating its Centenary year.
Topics of Interest
Technical papers in the following areas will be of interest (although the scope is not limited to these topics ONLY):
Components and Devices
Passive components - viz. magnetic components, capacitors, ultra-capacitors, energy storage elements; power semiconductor devices; drive and protection of devices; thermal management; sensors, control ICs, digital controllers and their applications in PE
Electric Machines and Drives
Permanent magnet machines, linear machines, switched reluctance machines, axial field machines, liquid cooled machines, energy efficient machines, high speed machines; drives for torque, speed and position control; sensor-less drives; auto-tuning drives; energy efficient drives; current-fed drives; medium voltage drives; high power drives
Converters and Control
Line-side converters and inverters, multi-level converters, matrix converters, multiquadrant converters, DC-DC converters, soft switching converters, converters for domestic applications, high voltage converters, high current converters
Power Quality and Power Systems Applications
FACTS devices, voltage compensation, current compensation, harmonic compensation; static switch; distributed generation, EMI/EMC issues
Electrical Power Utilization
Induction Heating, Electric Welding, Electric traction
Automotive and Aerospace Applications
Hybrid traction drives; battery chargers and monitors; compact power supplies; auxiliary drives
Others
Any other Applications of Power Electronics, PE Education
Call for Papers
First Call for Papers (floated in December 2010). (Download)
FIRST SUBMISSION
Interested authors must submit an abstract of 200 words (maximum) and a 5-page extended abstract of the work. The Abstract of 200 words must first mention the appropriate sub-area as laid down under each topic paragraph as mentioned in the menu, "Topics of Interest". Please follow the link, "Paper Submission" in the main page for uploading the abstract and uploading the extended abstract (extended abstract should be a pdf file).
The extended abstract (A4 paper, 5 pages long) must present the problem and its motivation, key equations and important results. It should also contain the abstract of the paper, figures, tables, results and references as appropriate. Experimental evidence presented in the extended abstract will be of value to the reviewers rather than a promise of the same in the final paper. The extended abstract should contain only the title of the paper, and should not contain the names and affiliations of the authors as the review will be “double blind.” The extended abstract should be in double-column format with single line spacing and a font size of 11. Graphics must be of sufficiently high resolution. Text inside graphics must be legible and should not be below font size 7. Authors must try to send the complete paper in the form of the extended abstract so that only the modifications suggested by the reviewers are added in the final paper which should not exceed 6 pages.
FINAL SUBMISSION
The "Authors' kit", detailing the format of the final paper, will be posted here in future.
The final paper should not exceed 6 A4 pages. For each extra page thereafter, additional charges have to be paid, as would be decided LATER by the organizers and will be posted here in future.
Accepted papers have to be FINALLY presented orally by one of the registered authors for getting included in the final conference proceedings.
The final papers will be included in the conference proceedings which will be brought out in electronic form on compact disks / dvd’s. Along with final submission (if not earlier), at least one of the authors must register for the conference for the paper to be included in the proceedings. A book of abstracts will also be published.
For wider dissemination, the accepted papers will be archived in the NaMPET website (www.nampet.org) which will permit free access to registered users under terms and conditions for fair use.
Important Dates
Deadline for submission of extended abstract June 30, 2011 July 17, 2011
Notification of acceptance of papers September 24, 2011
Submission of camera-ready manuscripts November 1, 2011
Submission of (oral) presentation files(ppt/pdf) for papers accepted fortechnical sessions December 1,2011
Conference Dates
Pre-Conference Tutorials December 19, 2011
Technical Sessions December 20-22, 2011
Registration
Any registered delegate can present a maximum of 2 papers against a single registration.
Conference Registration
Students (Both tutorial sessions included for Full-time students alone) Rs. 1500.00
Academicians Rs. 4000.00
Others Rs. 6000.00
Tutorial Registration
Students (Part-time) Rs. 250.00 per tutorial
Academicians and Others Rs. 750.00 per tutorial
Location
The National Power Electronics Conference (NPEC) 2011 will be held in the Department of Electrical Engineering, Bengal Engineering and Science University (BESU), Howrah, India - 711103.
BESU Shibpur is located in the city of Howrah (twin city of Kolkata, more popular as the yesteryear Calcutta). It is in the Shibpur area of Howrah and is near the Botanical Garden (2 bus-stops away). From the Howrah railway station, it is almost 5-6 kms. From Rabindra Sadan, a well-known landmark of southern part of the city of Kolkata, it is around 7 kms via the Vidyasagar Setu (bridge). Frequent bus service, taxi services are available from different parts of Kolkata and also from Howrah Station to BESU.
Accommodation
Persons attending the conference and staying in and around Kolkata will have to arrange for their accommodation themselves. Limited number of rooms are available at the BESU guest house which will be reserved for persons coming from neighbouring states. Date of booking, booking procedure will be put up in the website later. Maximum efforts will be taken to ensure booking of persons coming from far-away places but cannot be guaranteed in the beginning. In case accommodation is arranged, boarding and lodging charges will have to be paid extra (not a part of conference registration charges). Complimentary lunch and snacks will be provided on all conference days and dinner will be provided on 20th and 21st December 2011.
Please refer to applicable websites to have informations about accommodation (hotels, guest houses etc.) in and around Kolkata / Howrah (Shibpur, Botanical Garden).
During the month of December, the cities of Kolkata and Howrah area offer very pleasant climate. The average temperature during the day is between 22-28 degree Celsius. At night, the minimum temperature may be as low as 10-12 degree Celsius. Generally it does not rain and is dry. You may look at the following website (of BBC, UK) for weather and climate report: http://news.bbc.co.uk/weather/forecast/145
Contact us
E-mail: npec2011@becs.ac.in / npec2011@gmail.com
TeleFax: +91-33-26685018 – Direct (Please request to give the fax tone)
Fax: +91-33-26682916
For both of the above, please write in the subject line of the Fax document, “Kind Attn.: Dr. M. Sengupta, Dept. of Electrical Engineering, BESU, General query – NPEC 2011”.
Preferably, please fax during 10 AM – 5 PM on weekdays only.
Phones
+91-33-26685018 (Extn.: 29 or 22)
+91-33- 26684561 / 62 / 63 / 0521 / 0522 / 0523 (Extn. – 593 / 594 / 620 / 567 / 559)
website: http://npec2011.becs.ac.in/?id=home
Download full seminar papers At
http://www.enjineer.com/forum
National Power Electronics Conference 2011
The National Power Electronics Conference 2011 (NPEC 2011) is the 5th biennial conference of the Power Electronics community in India, focusing on the ongoing research in this area and seeking to find potential users of the laboratory-scale developments in industry. Launched in 2003 October at IIT Bombay, it was biennially held at IIT Kharagpur in December 2005, at IISc Bangalore in December 2007, at IIT Roorkee in June 2010. The present version of NPEC will be held in December 2011.
The objectives of the conference are to provide a forum to promote and accelerate high quality research inviting professional interactions for the advancement and indigenisation of Power Electronics in India. Papers with up-to-date research results are encouraged for submission. Specifically, papers having significant experimental results to validate the propositions will be given preference. Technical papers will be accepted for presentation after peer review. The pre-conference tutorials will be held on December 19, 2011. Apart from these plenary sessions, keynote lectures and invited talks will also be held.The country’s industry, research establishments and academia are cordially invited to participate in the paper presentations, tutorials, special sessions, exhibitions and social activities, and enjoy the hospitality of the 155-year old engineering institution which was the mother of the entire planning and implementation of IIT system in India.
Located flush on the banks of the river Hooghly, the erstwhile Bengal Engineering College (or B.E. College) presently stands as Bengal Engineering and Science University, Shibpur, Howrah. Sprawling over 170 acres of lush and varied greenery (being a part of the Indian Botanic Garden, 155 years ago) it has 7 halls of residence, 8 hostels, 2 of the best and biggest campus based playgrounds in eastern India. It has too many dwindling ingredients of “the Raj days”. Historic buildings, the celebrated clock-tower, the lush greenery and the cool river breeze - all cast a spell. It is 45 minutes drive from the Dum Dum Airport, 15 minutes from the Howrah railway terminus, 30 minutes from the Sealdah railway terminus and 20 minutes from the Kolkata City centre. The new railhead at Shalimar is 2 minutes drive from the campus. It is also in the fitness of things, that the Department of Electrical Engineering is simultaneously celebrating its Centenary year.
Topics of Interest
Technical papers in the following areas will be of interest (although the scope is not limited to these topics ONLY):
Components and Devices
Passive components - viz. magnetic components, capacitors, ultra-capacitors, energy storage elements; power semiconductor devices; drive and protection of devices; thermal management; sensors, control ICs, digital controllers and their applications in PE
Electric Machines and Drives
Permanent magnet machines, linear machines, switched reluctance machines, axial field machines, liquid cooled machines, energy efficient machines, high speed machines; drives for torque, speed and position control; sensor-less drives; auto-tuning drives; energy efficient drives; current-fed drives; medium voltage drives; high power drives
Converters and Control
Line-side converters and inverters, multi-level converters, matrix converters, multiquadrant converters, DC-DC converters, soft switching converters, converters for domestic applications, high voltage converters, high current converters
Power Quality and Power Systems Applications
FACTS devices, voltage compensation, current compensation, harmonic compensation; static switch; distributed generation, EMI/EMC issues
Electrical Power Utilization
Induction Heating, Electric Welding, Electric traction
Automotive and Aerospace Applications
Hybrid traction drives; battery chargers and monitors; compact power supplies; auxiliary drives
Others
Any other Applications of Power Electronics, PE Education
Call for Papers
First Call for Papers (floated in December 2010). (Download)
FIRST SUBMISSION
Interested authors must submit an abstract of 200 words (maximum) and a 5-page extended abstract of the work. The Abstract of 200 words must first mention the appropriate sub-area as laid down under each topic paragraph as mentioned in the menu, "Topics of Interest". Please follow the link, "Paper Submission" in the main page for uploading the abstract and uploading the extended abstract (extended abstract should be a pdf file).
The extended abstract (A4 paper, 5 pages long) must present the problem and its motivation, key equations and important results. It should also contain the abstract of the paper, figures, tables, results and references as appropriate. Experimental evidence presented in the extended abstract will be of value to the reviewers rather than a promise of the same in the final paper. The extended abstract should contain only the title of the paper, and should not contain the names and affiliations of the authors as the review will be “double blind.” The extended abstract should be in double-column format with single line spacing and a font size of 11. Graphics must be of sufficiently high resolution. Text inside graphics must be legible and should not be below font size 7. Authors must try to send the complete paper in the form of the extended abstract so that only the modifications suggested by the reviewers are added in the final paper which should not exceed 6 pages.
FINAL SUBMISSION
The "Authors' kit", detailing the format of the final paper, will be posted here in future.
The final paper should not exceed 6 A4 pages. For each extra page thereafter, additional charges have to be paid, as would be decided LATER by the organizers and will be posted here in future.
Accepted papers have to be FINALLY presented orally by one of the registered authors for getting included in the final conference proceedings.
The final papers will be included in the conference proceedings which will be brought out in electronic form on compact disks / dvd’s. Along with final submission (if not earlier), at least one of the authors must register for the conference for the paper to be included in the proceedings. A book of abstracts will also be published.
For wider dissemination, the accepted papers will be archived in the NaMPET website (www.nampet.org) which will permit free access to registered users under terms and conditions for fair use.
Important Dates
Deadline for submission of extended abstract June 30, 2011 July 17, 2011
Notification of acceptance of papers September 24, 2011
Submission of camera-ready manuscripts November 1, 2011
Submission of (oral) presentation files(ppt/pdf) for papers accepted fortechnical sessions December 1,2011
Conference Dates
Pre-Conference Tutorials December 19, 2011
Technical Sessions December 20-22, 2011
Registration
Any registered delegate can present a maximum of 2 papers against a single registration.
Conference Registration
Students (Both tutorial sessions included for Full-time students alone) Rs. 1500.00
Academicians Rs. 4000.00
Others Rs. 6000.00
Tutorial Registration
Students (Part-time) Rs. 250.00 per tutorial
Academicians and Others Rs. 750.00 per tutorial
Location
The National Power Electronics Conference (NPEC) 2011 will be held in the Department of Electrical Engineering, Bengal Engineering and Science University (BESU), Howrah, India - 711103.
BESU Shibpur is located in the city of Howrah (twin city of Kolkata, more popular as the yesteryear Calcutta). It is in the Shibpur area of Howrah and is near the Botanical Garden (2 bus-stops away). From the Howrah railway station, it is almost 5-6 kms. From Rabindra Sadan, a well-known landmark of southern part of the city of Kolkata, it is around 7 kms via the Vidyasagar Setu (bridge). Frequent bus service, taxi services are available from different parts of Kolkata and also from Howrah Station to BESU.
Accommodation
Persons attending the conference and staying in and around Kolkata will have to arrange for their accommodation themselves. Limited number of rooms are available at the BESU guest house which will be reserved for persons coming from neighbouring states. Date of booking, booking procedure will be put up in the website later. Maximum efforts will be taken to ensure booking of persons coming from far-away places but cannot be guaranteed in the beginning. In case accommodation is arranged, boarding and lodging charges will have to be paid extra (not a part of conference registration charges). Complimentary lunch and snacks will be provided on all conference days and dinner will be provided on 20th and 21st December 2011.
Please refer to applicable websites to have informations about accommodation (hotels, guest houses etc.) in and around Kolkata / Howrah (Shibpur, Botanical Garden).
During the month of December, the cities of Kolkata and Howrah area offer very pleasant climate. The average temperature during the day is between 22-28 degree Celsius. At night, the minimum temperature may be as low as 10-12 degree Celsius. Generally it does not rain and is dry. You may look at the following website (of BBC, UK) for weather and climate report: http://news.bbc.co.uk/weather/forecast/145
Contact us
E-mail: npec2011@becs.ac.in / npec2011@gmail.com
TeleFax: +91-33-26685018 – Direct (Please request to give the fax tone)
Fax: +91-33-26682916
For both of the above, please write in the subject line of the Fax document, “Kind Attn.: Dr. M. Sengupta, Dept. of Electrical Engineering, BESU, General query – NPEC 2011”.
Preferably, please fax during 10 AM – 5 PM on weekdays only.
Phones
+91-33-26685018 (Extn.: 29 or 22)
+91-33- 26684561 / 62 / 63 / 0521 / 0522 / 0523 (Extn. – 593 / 594 / 620 / 567 / 559)
website: http://npec2011.becs.ac.in/?id=home
Download full seminar papers At
http://www.enjineer.com/forum
4th International Conference on Recent Advances in Composite Materials (ICRACM - 2013) At Banaras Hindu University, Varanasi
4th International Conference on Recent Advances in Composite Materials (ICRACM - 2013) At Banaras Hindu University, Varanasi
About the ICRACM Conference
Composite materials have unique advantages over monolithic materials, such as high strength, high stiffness, long fatigue life, low density, and adaptability to the intended function of the structure. Significant achievement has been made in the design/development and applications. Considerable innovative research is still continuing for the development of continuous fibre composites and particulate composites for critical
applications. Structural requirements demand ultimate and reliable composite material performance to react to global static and dynamic external and component loads.
Therefore, ICRACM-2013 aims at bringing together academicians and researchers in various disciplines to share knowledge and exchange views, for useful industrial applications of composite materials. The conference will facilitate discussion on the latest trends in the entire gamut of composite materials. The deliberations will certainly be helping researchers for embarking upon newer aspect design and development of various types of composites.
Publication
The conference proceeding will be published as a fully peer reviewed volume of advances in composite materials. The papers without presentation / discussion in conference and registration fees will not be included in the conference proceedings. The details of publishing houses that have brought out the proceedings of ICRACM-2004 and ICRACM-2007 conference papers are given below:
ICRACM-2004
* Recent Advances in Composite Materials (Edited by V. K. Srivastava and M. Singh), Allied Publishers Pvt. Ltd., New Delhi, 2004, p. 1-562.
• International Conference on Recent Advances in Composite Materials (Edited by V. K. Srivastava, M. Singh and G. Kostorz), Special Issue of Materials Science & Engineering -A, Elsevier Publisher, UK, 412, 1-2, December 2005, p. 1-348.
ICRACM-2007
*Recent Advances in Composite Materials: Intelligent smart sustainable and infrastructural materials (Edited by V. K. Srivastava, M. Singh, A. Banthia and A.A Mufti), Allied Publishers Pvt. Ltd., New Delhi, 2007, p. 1-1118.
* International Conference on Recent Advances in Composite Materials (Edited by V. K. Srivastava, M. Singh, R. Asthana and G. Kostorz), Special Issue of Materials Science & Engineering -A, Elsevier Publisher, UK, 498, 1-2, December, 2008, p. 1-514.
ICRACM-2010
3rd ICRACM was held at ENSIL, University of Limoges, Limoges, France from 13-15th December 2010 under the chairmanship of Prof. A. Pizzi and Prof. F. Gambier. More than 140 delegates were presented their papers inspite of heavy snow all over the Europe. Special issue papers are planned to be published in Wood composites and European Ceramic International journals.
Conference Topics
The conference will broadly cover the following topics:
• Polymer composites
• Wood composites
• Metal matrix composites
• Ceramic composites and advanced ceramics
• Nanomaterials and Nano-composites
• Biomaterials and Bio-composites
• Recycling & repair technology in composites
• Recent developments in fibre and particulate composites for structural and tribological applications (Fracture, Fatigue, Impact, Wear & Friction, Environmental studies)
• Critical issues in composites (Interfaces, processing applications and manufacturing)
• Testing & Quality control of composites
• Composites in intelligent and sustainable civil structure
• Application of composites in low cost houses and bridges
• Composite Technology – Industrial Applications
Eminent scientists and engineers from India and abroad will deliver expert lectures on above topics.
Submission of Papers
Technical papers are invited in the areas specified under the conference scopes. Interested participants are invited to submit an abstract not exceeding 300 words indicating clearly the objective and conclusions of the work. Authors are required to prepare manuscripts on A4 size paper with margins of 2.5 cm. They should use single line spacing in MSWord format. The full papers should be sent with original drawing, figures, and photographs. The paper should be sent in electronic formats and hard copy with CD. All papers will be refereed and criterion of rejection will be lack of originality. The language of the conference is English.
DEADLINES
* INVITATION TO SUBMIT ABSTRACT : 15, AUGUST 2012
* ACCEPTANCE OF ABSTRACT : 15, SEPTEMBER 2012
* INVITATION TO SUBMIT FULL PAPER : 15, OCTOBER 2012
Registration Fee
Foreign delegates (FD) - US $ 600 : US $ 400 for students
Indian delegates (ID) - Rs. 4000 : Rs. 2000 for students
(Conference fee covers proceeding, lunches, conference banquet etc.)
Sponsorships & Advertisements
Sponsorship tariffs are given below
Industries: - 50,000.00
Academic Institutions: - 20,000.00
The Sponsor can nominate four delegates free of charge. Also, advertisements in souvenir will be published at the cost of Rs. 50,000.00 (back full page), Rs. 20,000.00 (inside full page) and Rs. 10,000.00 (half page).
Registration fee, sponsorship fee and advertisement tariff are to be sent by means of Cheque/Demand Draft payable at Bank of Baroda, BHU, Varanasi-221005, India and drawn in favour of “CHAIRMAN- ICRACM”.
Venue of the Conference: GOA, INDIA
Goa is very small state in India and is located in western coastal region in India in the region known as Konkan.The state is considered to be the one of the fourth smallest state in terms of Population. Goa is surrounded by maharashtra from the north and Karnataka from the east. The Arabia Sea forms its western coastal part of India. Panaji is the capital city of Goa Vasco is considered to be the largest city in Goa in terms of Population. There is an influence of Portuguese culture in the city of Margao. The state is well appreciated for its beautiful beaches, temples and cultural heritage present in the city. They city looks
very attractive due to the influence of Flora and fauna. There are hundreds of thousands of international as well as domestic tourists, who visit Goa and enjoy the culture Goa is also famous for its standard of living, which is high and it is considered to be one of the most developed states in India. The airport is located 15 km away from Panaji, the capital city of Goa.There are many airlines such as Air Deccan, Kingfisher, Indian Airlines, Air Sahara, which operates their flights to and from Goa at regular intervals and connects the
state with all the major cities and towns in India.There are many international airlines such as Air Arabia, Air India, Malaysian Airlines, Thai Airlines, which operates their flights from Goa to different countries located in the world. There are many chartered flights, which are operated by private company such as Thomascook
Goa is the dream destination for holiday makers in India. It was the birthplace of ‘flower generation’ who came here in the seventies and some of them just opted to stay back. The history of Goa dates back to the 3rd century BC. Later, it became a colony of Portuguese traders.Winter season is the best time to visit Goa and its serene beaches. Panaji is the state’s capital, and Vasco Da Gama is the largest city of the state. Goa itself is the smallest state by area in India. Konkani is the local language. If you want to savor the zestful environment of this place, then grab a cheap air ticket to Goa and reach this wonderful beach town at the earliest.
Accommodation
Delegates are advised to book accommodation through any government-authorized travel agent or by own in hotels/motels near by the conference venue. Website of the hotels in GOA; www.goa-hotels.co.in
Contact Us
Mail to
Prof. V. K. Srivastava
(Chairman-ICRACM)
Dept. of Mechanical Engineering
Institute of Technology
Banaras Hindu University
Varanasi - 221 005, INDIA
Email: icracm2013@gmail.com
Phone : + 91-542-6702833
Fax : + 91-542-2368174, 2368428
website: http://www.itbhu.ac.in/mec/ICRACM-2013.pdf
Download full seminar papers At
http://www.enjineer.com/forum
About the ICRACM Conference
Composite materials have unique advantages over monolithic materials, such as high strength, high stiffness, long fatigue life, low density, and adaptability to the intended function of the structure. Significant achievement has been made in the design/development and applications. Considerable innovative research is still continuing for the development of continuous fibre composites and particulate composites for critical
applications. Structural requirements demand ultimate and reliable composite material performance to react to global static and dynamic external and component loads.
Therefore, ICRACM-2013 aims at bringing together academicians and researchers in various disciplines to share knowledge and exchange views, for useful industrial applications of composite materials. The conference will facilitate discussion on the latest trends in the entire gamut of composite materials. The deliberations will certainly be helping researchers for embarking upon newer aspect design and development of various types of composites.
Publication
The conference proceeding will be published as a fully peer reviewed volume of advances in composite materials. The papers without presentation / discussion in conference and registration fees will not be included in the conference proceedings. The details of publishing houses that have brought out the proceedings of ICRACM-2004 and ICRACM-2007 conference papers are given below:
ICRACM-2004
* Recent Advances in Composite Materials (Edited by V. K. Srivastava and M. Singh), Allied Publishers Pvt. Ltd., New Delhi, 2004, p. 1-562.
• International Conference on Recent Advances in Composite Materials (Edited by V. K. Srivastava, M. Singh and G. Kostorz), Special Issue of Materials Science & Engineering -A, Elsevier Publisher, UK, 412, 1-2, December 2005, p. 1-348.
ICRACM-2007
*Recent Advances in Composite Materials: Intelligent smart sustainable and infrastructural materials (Edited by V. K. Srivastava, M. Singh, A. Banthia and A.A Mufti), Allied Publishers Pvt. Ltd., New Delhi, 2007, p. 1-1118.
* International Conference on Recent Advances in Composite Materials (Edited by V. K. Srivastava, M. Singh, R. Asthana and G. Kostorz), Special Issue of Materials Science & Engineering -A, Elsevier Publisher, UK, 498, 1-2, December, 2008, p. 1-514.
ICRACM-2010
3rd ICRACM was held at ENSIL, University of Limoges, Limoges, France from 13-15th December 2010 under the chairmanship of Prof. A. Pizzi and Prof. F. Gambier. More than 140 delegates were presented their papers inspite of heavy snow all over the Europe. Special issue papers are planned to be published in Wood composites and European Ceramic International journals.
Conference Topics
The conference will broadly cover the following topics:
• Polymer composites
• Wood composites
• Metal matrix composites
• Ceramic composites and advanced ceramics
• Nanomaterials and Nano-composites
• Biomaterials and Bio-composites
• Recycling & repair technology in composites
• Recent developments in fibre and particulate composites for structural and tribological applications (Fracture, Fatigue, Impact, Wear & Friction, Environmental studies)
• Critical issues in composites (Interfaces, processing applications and manufacturing)
• Testing & Quality control of composites
• Composites in intelligent and sustainable civil structure
• Application of composites in low cost houses and bridges
• Composite Technology – Industrial Applications
Eminent scientists and engineers from India and abroad will deliver expert lectures on above topics.
Submission of Papers
Technical papers are invited in the areas specified under the conference scopes. Interested participants are invited to submit an abstract not exceeding 300 words indicating clearly the objective and conclusions of the work. Authors are required to prepare manuscripts on A4 size paper with margins of 2.5 cm. They should use single line spacing in MSWord format. The full papers should be sent with original drawing, figures, and photographs. The paper should be sent in electronic formats and hard copy with CD. All papers will be refereed and criterion of rejection will be lack of originality. The language of the conference is English.
DEADLINES
* INVITATION TO SUBMIT ABSTRACT : 15, AUGUST 2012
* ACCEPTANCE OF ABSTRACT : 15, SEPTEMBER 2012
* INVITATION TO SUBMIT FULL PAPER : 15, OCTOBER 2012
Registration Fee
Foreign delegates (FD) - US $ 600 : US $ 400 for students
Indian delegates (ID) - Rs. 4000 : Rs. 2000 for students
(Conference fee covers proceeding, lunches, conference banquet etc.)
Sponsorships & Advertisements
Sponsorship tariffs are given below
Industries: - 50,000.00
Academic Institutions: - 20,000.00
The Sponsor can nominate four delegates free of charge. Also, advertisements in souvenir will be published at the cost of Rs. 50,000.00 (back full page), Rs. 20,000.00 (inside full page) and Rs. 10,000.00 (half page).
Registration fee, sponsorship fee and advertisement tariff are to be sent by means of Cheque/Demand Draft payable at Bank of Baroda, BHU, Varanasi-221005, India and drawn in favour of “CHAIRMAN- ICRACM”.
Venue of the Conference: GOA, INDIA
Goa is very small state in India and is located in western coastal region in India in the region known as Konkan.The state is considered to be the one of the fourth smallest state in terms of Population. Goa is surrounded by maharashtra from the north and Karnataka from the east. The Arabia Sea forms its western coastal part of India. Panaji is the capital city of Goa Vasco is considered to be the largest city in Goa in terms of Population. There is an influence of Portuguese culture in the city of Margao. The state is well appreciated for its beautiful beaches, temples and cultural heritage present in the city. They city looks
very attractive due to the influence of Flora and fauna. There are hundreds of thousands of international as well as domestic tourists, who visit Goa and enjoy the culture Goa is also famous for its standard of living, which is high and it is considered to be one of the most developed states in India. The airport is located 15 km away from Panaji, the capital city of Goa.There are many airlines such as Air Deccan, Kingfisher, Indian Airlines, Air Sahara, which operates their flights to and from Goa at regular intervals and connects the
state with all the major cities and towns in India.There are many international airlines such as Air Arabia, Air India, Malaysian Airlines, Thai Airlines, which operates their flights from Goa to different countries located in the world. There are many chartered flights, which are operated by private company such as Thomascook
Goa is the dream destination for holiday makers in India. It was the birthplace of ‘flower generation’ who came here in the seventies and some of them just opted to stay back. The history of Goa dates back to the 3rd century BC. Later, it became a colony of Portuguese traders.Winter season is the best time to visit Goa and its serene beaches. Panaji is the state’s capital, and Vasco Da Gama is the largest city of the state. Goa itself is the smallest state by area in India. Konkani is the local language. If you want to savor the zestful environment of this place, then grab a cheap air ticket to Goa and reach this wonderful beach town at the earliest.
Accommodation
Delegates are advised to book accommodation through any government-authorized travel agent or by own in hotels/motels near by the conference venue. Website of the hotels in GOA; www.goa-hotels.co.in
Contact Us
Mail to
Prof. V. K. Srivastava
(Chairman-ICRACM)
Dept. of Mechanical Engineering
Institute of Technology
Banaras Hindu University
Varanasi - 221 005, INDIA
Email: icracm2013@gmail.com
Phone : + 91-542-6702833
Fax : + 91-542-2368174, 2368428
website: http://www.itbhu.ac.in/mec/ICRACM-2013.pdf
Download full seminar papers At
http://www.enjineer.com/forum
National Conference On Recent Advances in Civil Engineering (RACE-2011) At Banaras Hindu University, Varanasi
National Conference On Recent Advances in Civil Engineering (RACE-2011) At Banaras Hindu University, Varanasi
About
Civil Engineering is not only vast but also complex and so, challenging. Complexity is identified with nondeterministic behaviors of design variables which arise because of lack of complete understanding of the system behavior and inaccurate data. A consistent endeavor has been made by the Civil Engineering professionals since last few years to overcome this problem by employing certain advanced solution scheme. Present conference aims to bring together the recent advanced tools e.g. Physical, Analog, or Mathematical modeling together with latest advances in the data recording and measurement in solving the Civil Engineering problems.
Conference Themes
Structural Engineering
Hydraulics and Water Resource Engineering
Environmental Engineering
Geotechnical and Geo-environmental Engineering
Highway and Transportation Engineering
Application of Geo-informatics in Civil Engineering
Application of Applied Geology in Civil Engineering
Mathematical Modeling in Civil Engineering
Construction Technology and Management
Disaster Mitigation and Management
Infrastructural Planning and Management
Important dates
Submission of abstract : July 15, 2011.
Submission of full papers : July 31, 2010.
Acceptance of full papers : August 31, 2011.
Registration of delegates : September 15, 2011
Registration
Registration Fee
Category of Delegate Amount
Research Scholars/Student Participants Rs. 1000 /-
Technical Experts/Academicians/Administrators Rs. 2000/-
Sponsored Delegates from government Rs. 3000/-
Deptt./Corporations /Boards/Industries/
International Agencies and Organizations
Spouses accompanying a delegate Rs. 1000/-
Papers will be published only if registration is done before deadline
To Download Regisration Form Click Here
Please Download the Registration form and Send it to
Convener, RACE-2011
Department of Civil Engineering
I.T., B.H.U., Varanasi- 221005
U.P.
Fax- 0542-2307016 (O)
Mobile: +919792262852; +919453788219
Accommodation
Accommodation may be provided on the payment basis in various guest houses of the University and outside BHU Campus.
BHU Guest House :
1. Gandhi Alumni Centre
2. University guest house
3. IT, Hostel (Boys & Girls)
Please note the alternative accommodation may be available outside the campus in different hotels
About Varanasi
About the City and University
Varanasi is credited to be the oldest living city in the world. The antiquity of the city has been aptly described by Mark Twain as "Banaras is older than history, older than tradition, older than even legend, and looks twice as old as all of them put together!”
The Banaras Hindu University (BHU), an internationally reputed temple of learning, situated in the holy city of Varanasi, was established by Pandit Madan Mohan Malaviyaji in 1916. The University comprises of 3 Institutes, 15 Faculties, 124 Departments and 4 Interdisciplinary Centers. Institute of Technology (IT) in its present form came into being in 1968. There are 16 Departments/Schools and 7 Centers of Research/ Advance Studies. Civil Engineering education started in this University in 1949 in the erstwhile Engineering College, and the Department of Civil Engineering is running since 1975. It offers B. Tech, B. Tech-M. Tech IDD, M. Tech and Ph.D. programs. At present postgraduate courses are offered in five specializations, namely, Structural Engineering, Hydraulics and Water Resources Engineering, Geotechnical Engineering, Environmental Engineering, and Transportation Engineering.
Travel
Varanasi is around 780 km from Delhi on Delhi-Howrah rail route. The city is well connected to all major towns of India through rail and air routes. Varanasi Cantt junction and Babatpur airport is around 6 km and 25 km respectively from BHU campus. The climate in mid October is normally dry, cool and pleasant.
Contact Us
Convener, RACE-2011
Department of Civil Engineering
I.T., B.H.U., Varanasi- 221005
Email: race@itbhu.ac.in
Fax- 0542-2368283 (O)
Mobile: +919792262852; +919453788219
website: http://itbhu.ac.in/race/2011/index.html
Download full seminar papers At
http://www.enjineer.com/forum
About
Civil Engineering is not only vast but also complex and so, challenging. Complexity is identified with nondeterministic behaviors of design variables which arise because of lack of complete understanding of the system behavior and inaccurate data. A consistent endeavor has been made by the Civil Engineering professionals since last few years to overcome this problem by employing certain advanced solution scheme. Present conference aims to bring together the recent advanced tools e.g. Physical, Analog, or Mathematical modeling together with latest advances in the data recording and measurement in solving the Civil Engineering problems.
Conference Themes
Structural Engineering
Hydraulics and Water Resource Engineering
Environmental Engineering
Geotechnical and Geo-environmental Engineering
Highway and Transportation Engineering
Application of Geo-informatics in Civil Engineering
Application of Applied Geology in Civil Engineering
Mathematical Modeling in Civil Engineering
Construction Technology and Management
Disaster Mitigation and Management
Infrastructural Planning and Management
Important dates
Submission of abstract : July 15, 2011.
Submission of full papers : July 31, 2010.
Acceptance of full papers : August 31, 2011.
Registration of delegates : September 15, 2011
Registration
Registration Fee
Category of Delegate Amount
Research Scholars/Student Participants Rs. 1000 /-
Technical Experts/Academicians/Administrators Rs. 2000/-
Sponsored Delegates from government Rs. 3000/-
Deptt./Corporations /Boards/Industries/
International Agencies and Organizations
Spouses accompanying a delegate Rs. 1000/-
Papers will be published only if registration is done before deadline
To Download Regisration Form Click Here
Please Download the Registration form and Send it to
Convener, RACE-2011
Department of Civil Engineering
I.T., B.H.U., Varanasi- 221005
U.P.
Fax- 0542-2307016 (O)
Mobile: +919792262852; +919453788219
Accommodation
Accommodation may be provided on the payment basis in various guest houses of the University and outside BHU Campus.
BHU Guest House :
1. Gandhi Alumni Centre
2. University guest house
3. IT, Hostel (Boys & Girls)
Please note the alternative accommodation may be available outside the campus in different hotels
About Varanasi
About the City and University
Varanasi is credited to be the oldest living city in the world. The antiquity of the city has been aptly described by Mark Twain as "Banaras is older than history, older than tradition, older than even legend, and looks twice as old as all of them put together!”
The Banaras Hindu University (BHU), an internationally reputed temple of learning, situated in the holy city of Varanasi, was established by Pandit Madan Mohan Malaviyaji in 1916. The University comprises of 3 Institutes, 15 Faculties, 124 Departments and 4 Interdisciplinary Centers. Institute of Technology (IT) in its present form came into being in 1968. There are 16 Departments/Schools and 7 Centers of Research/ Advance Studies. Civil Engineering education started in this University in 1949 in the erstwhile Engineering College, and the Department of Civil Engineering is running since 1975. It offers B. Tech, B. Tech-M. Tech IDD, M. Tech and Ph.D. programs. At present postgraduate courses are offered in five specializations, namely, Structural Engineering, Hydraulics and Water Resources Engineering, Geotechnical Engineering, Environmental Engineering, and Transportation Engineering.
Travel
Varanasi is around 780 km from Delhi on Delhi-Howrah rail route. The city is well connected to all major towns of India through rail and air routes. Varanasi Cantt junction and Babatpur airport is around 6 km and 25 km respectively from BHU campus. The climate in mid October is normally dry, cool and pleasant.
Contact Us
Convener, RACE-2011
Department of Civil Engineering
I.T., B.H.U., Varanasi- 221005
Email: race@itbhu.ac.in
Fax- 0542-2368283 (O)
Mobile: +919792262852; +919453788219
website: http://itbhu.ac.in/race/2011/index.html
Download full seminar papers At
http://www.enjineer.com/forum
Sunday, July 3, 2011
NATIONAL CONFERENCE ON RECENT TRENDS IN ELECTRICAL ENGINEERING (RTIEE11) At SARDAR VALLABHBHAI NATIONAL INSTITUTE OF TECHNOLOGY, SURAT
NATIONAL CONFERENCE ON RECENT TRENDS IN ELECTRICAL ENGINEERING (RTIEE11) At SARDAR VALLABHBHAI NATIONAL INSTITUTE OF TECHNOLOGY, SURAT
CONFERENCE OBJECTIVES
Many academic institutions, research organizations, consultancy firms, and government organizations are involved in the development of Electrical Engineering in various directions. The proposed conference is providing a common platform to share skill and knowledge on the issues arising out of researches and challenges in the present context. The proposed conference is designed to create opening for discussions for present practices in Electrical Engineering and appraise the same in the circumstance of its long term sustainability.
CONFERENCE THEMES
The conference will be focused on the various direction of development in Electrical Engineering. Topics of interest include but not limited to the following subjects of Electrical Engineering
• Power System Operation and Control
• High Voltage Engineering
• Power Electronics and Electrical Drives
• Control System Engineering
• Measurement and Instrumentation
• Electrical Machines and Electromagnetic fields
• Digital Signal Processing
• Renewable Energy Sources
• Microcontroller and Microprocessor
• Power Quality Issues
• Application of Soft-computing Techniques in Electrical Engineering
• Hybrid Electric Vehicles
KEY CONFERENCE DATES
• Last date for submission of full-length papers Aug. 15, 2011
• Intimation of acceptance of full-length papers Oct. 30, 2011
• Last date of registration Nov. 15, 2011
REGISTRATION FEE & PUBLICATION
Students / Research Scholars Rs. 500/-
Faculty Members from Academic Institutes Rs. 1,000/-
Delegates from Industries and R&D Institutions / other organization Rs. 2,500/-
Accompanying Persons Spouse Rs. 500/-
Registration fee covers all local hospitalities excluding accommodation. Proceedings of the Conference consisting of keynote addresses and papers from invited and contributing authors will also be published.
ACCOMMODATION
Accommodation will be available in Hostel Guest House /Institute Guest House on the institute premises on chargeable basis.
CORRESPONDENCE ADDRESS
Dr. R. Roy / Dr. P. Kundu
Convenors, RTIEE 11
Electrical Engineering Department, S. V. National Institute of
Technology, Ichchhanath, Surat, Gujarat, Pin – 395007.
Full-length paper to be send: rr@eed.svnit.ac.in;
pk@eed.svnit.ac.in
Phone : Dr. R. Roy, 0261-2201664 (O), Mo:9904402937
Dr. P. Kundu, 0261-2201665 (O), Mo:9974556731
Fax: 0261 – 2228394.
website: http://www.svnit.ac.in/conferences/RTIEE11.pdf
Download full seminar papers At
http://www.enjineer.com/forum
CONFERENCE OBJECTIVES
Many academic institutions, research organizations, consultancy firms, and government organizations are involved in the development of Electrical Engineering in various directions. The proposed conference is providing a common platform to share skill and knowledge on the issues arising out of researches and challenges in the present context. The proposed conference is designed to create opening for discussions for present practices in Electrical Engineering and appraise the same in the circumstance of its long term sustainability.
CONFERENCE THEMES
The conference will be focused on the various direction of development in Electrical Engineering. Topics of interest include but not limited to the following subjects of Electrical Engineering
• Power System Operation and Control
• High Voltage Engineering
• Power Electronics and Electrical Drives
• Control System Engineering
• Measurement and Instrumentation
• Electrical Machines and Electromagnetic fields
• Digital Signal Processing
• Renewable Energy Sources
• Microcontroller and Microprocessor
• Power Quality Issues
• Application of Soft-computing Techniques in Electrical Engineering
• Hybrid Electric Vehicles
KEY CONFERENCE DATES
• Last date for submission of full-length papers Aug. 15, 2011
• Intimation of acceptance of full-length papers Oct. 30, 2011
• Last date of registration Nov. 15, 2011
REGISTRATION FEE & PUBLICATION
Students / Research Scholars Rs. 500/-
Faculty Members from Academic Institutes Rs. 1,000/-
Delegates from Industries and R&D Institutions / other organization Rs. 2,500/-
Accompanying Persons Spouse Rs. 500/-
Registration fee covers all local hospitalities excluding accommodation. Proceedings of the Conference consisting of keynote addresses and papers from invited and contributing authors will also be published.
ACCOMMODATION
Accommodation will be available in Hostel Guest House /Institute Guest House on the institute premises on chargeable basis.
CORRESPONDENCE ADDRESS
Dr. R. Roy / Dr. P. Kundu
Convenors, RTIEE 11
Electrical Engineering Department, S. V. National Institute of
Technology, Ichchhanath, Surat, Gujarat, Pin – 395007.
Full-length paper to be send: rr@eed.svnit.ac.in;
pk@eed.svnit.ac.in
Phone : Dr. R. Roy, 0261-2201664 (O), Mo:9904402937
Dr. P. Kundu, 0261-2201665 (O), Mo:9974556731
Fax: 0261 – 2228394.
website: http://www.svnit.ac.in/conferences/RTIEE11.pdf
Download full seminar papers At
http://www.enjineer.com/forum
Golden Jubilee Celebration 2nd National Conference On RECENT ADVANCES IN MANUFACTURING (RAM-2011) At S. V. National Institute of Technology Surat
Golden Jubilee Celebration 2nd National Conference On RECENT ADVANCES IN MANUFACTURING (RAM-2011) At S. V. National Institute of Technology Surat
CONFERENCE TOPICS
· Advancement in Traditional Machining & Fabrication Processes (Casting, Welding etc.)
· Advanced Manufacturing Processes
· Non-Traditional Machining System
· Precision and Micro-machining
· Modelling, Simulation and Optimization of Manufacturing Systems
· Applications of AI Techniques in Manufacturing
· Precision Measurement, Quality & Reliability Engineering
· Automation and Robotics
· CAD, CAM and CIM
· MRP, ERP, Logistic Supply Chain Management, Knowledge Management
· Technology Management
· Any other topic relevant to theme of conf.
CONFERENCE THEME & OBJECTIVES
The role of manufacturing in the country’s economy and societal development has long been established through their wealth creation activities. To deepen and broaden our knowledge of manufacturing and to
increase innovation and responsiveness to ever-increasing international needs, more in-depth studies are critically needed at this juncture of global competitive scenario. Hence, to tackle the different issues and
to cope up with the changing environment of manufacturing technology, the aim of the RAM-2010 is to bring together specialists and practitioners from Industries, R&D institutes and Academician and to provide the forum for exchange of ideas.
SUBMISSION OF TECHNICAL PAPERS
Papers are being solicited in the technical areas listed in the conference topics. The authors are requested to send original contribution of ongoing research and unpublished research work related to Manufacturing. Full paper of maximum SIX pages is to be submitted, typed on A4 size paper as per notified format. Title, authors, affiliation, address, phone and e-mail of the authors must be included. Authors will be notified about the acceptance/ revision/rejection of the paper in time.
TECHNICAL PROGRAMMES
The conference will include keynote lectures by renowned experts in the field of Advanced Manufacturing Technology. Accepted papers on current topics of interest on Manufacturing Technology will be presented in parallel sessions.
IMPORTANT DATES
Receipt of formatted manuscripts for review (full paper) : 1st August, 2011
Confirmation of acceptance of papers : 8th August, 2011
Final submission of accepted papers for the proceedings : 15th August, 2011
Last date of Registration: 30th August, 2011
Conference : 15-17 September, 2011
REGISTRATION & PUBLICATION
Delegates from Industries : Rs. 3000/-
Delegates from R&D and Academic Institution : Rs. 1500/-
Student Delegates : Rs. 1000/-
Overseas Delegates : US $ 150
All registered papers will be published in the Conf. Proceedings. Also, selected papers may be considered for publication in reputed National Journals after peer-review process.
Contact Us
Dr. S. Kumar / Dr. K. P. Desai
Convenor, RAM-2011
Dept. of Mechanical Engineering
S. V. National Institute of Technology
Surat- 395007
E-mail: ncram2011@gmail.com
Phone : 0261-2201697 (Office)
91-9824590088 (S. Kumar)
91-9924576766 (K. P. Desai)
website: http://www.svnit.ac.in/conferences/RAM-2011.pdf
Download full seminar papers At
http://www.enjineer.com/forum
CONFERENCE TOPICS
· Advancement in Traditional Machining & Fabrication Processes (Casting, Welding etc.)
· Advanced Manufacturing Processes
· Non-Traditional Machining System
· Precision and Micro-machining
· Modelling, Simulation and Optimization of Manufacturing Systems
· Applications of AI Techniques in Manufacturing
· Precision Measurement, Quality & Reliability Engineering
· Automation and Robotics
· CAD, CAM and CIM
· MRP, ERP, Logistic Supply Chain Management, Knowledge Management
· Technology Management
· Any other topic relevant to theme of conf.
CONFERENCE THEME & OBJECTIVES
The role of manufacturing in the country’s economy and societal development has long been established through their wealth creation activities. To deepen and broaden our knowledge of manufacturing and to
increase innovation and responsiveness to ever-increasing international needs, more in-depth studies are critically needed at this juncture of global competitive scenario. Hence, to tackle the different issues and
to cope up with the changing environment of manufacturing technology, the aim of the RAM-2010 is to bring together specialists and practitioners from Industries, R&D institutes and Academician and to provide the forum for exchange of ideas.
SUBMISSION OF TECHNICAL PAPERS
Papers are being solicited in the technical areas listed in the conference topics. The authors are requested to send original contribution of ongoing research and unpublished research work related to Manufacturing. Full paper of maximum SIX pages is to be submitted, typed on A4 size paper as per notified format. Title, authors, affiliation, address, phone and e-mail of the authors must be included. Authors will be notified about the acceptance/ revision/rejection of the paper in time.
TECHNICAL PROGRAMMES
The conference will include keynote lectures by renowned experts in the field of Advanced Manufacturing Technology. Accepted papers on current topics of interest on Manufacturing Technology will be presented in parallel sessions.
IMPORTANT DATES
Receipt of formatted manuscripts for review (full paper) : 1st August, 2011
Confirmation of acceptance of papers : 8th August, 2011
Final submission of accepted papers for the proceedings : 15th August, 2011
Last date of Registration: 30th August, 2011
Conference : 15-17 September, 2011
REGISTRATION & PUBLICATION
Delegates from Industries : Rs. 3000/-
Delegates from R&D and Academic Institution : Rs. 1500/-
Student Delegates : Rs. 1000/-
Overseas Delegates : US $ 150
All registered papers will be published in the Conf. Proceedings. Also, selected papers may be considered for publication in reputed National Journals after peer-review process.
Contact Us
Dr. S. Kumar / Dr. K. P. Desai
Convenor, RAM-2011
Dept. of Mechanical Engineering
S. V. National Institute of Technology
Surat- 395007
E-mail: ncram2011@gmail.com
Phone : 0261-2201697 (Office)
91-9824590088 (S. Kumar)
91-9924576766 (K. P. Desai)
website: http://www.svnit.ac.in/conferences/RAM-2011.pdf
Download full seminar papers At
http://www.enjineer.com/forum
Subscribe to:
Posts (Atom)