[B]ADAPTIVE CRUISE CONTROL[/B]
[B]ABSTRACT[/B]
This report explains the Adaptive Cruise Control system in detail. All the necessary components i.e. range sensor, curve sensors, actuators, display system are described and their respective strength and weaknesses are addressed. The system architecture contains system overview, control strategy and the concept for driver-ACC interaction. Afterwards the principles as well as the current technical limits of ACC systems are discussed. As an outlook, development trends for extended functionality are given for next generation of driver assistance systems.
[B]INTRODUCTION[/B]
In this report the structure and functionality of ACC systems are discussed in detail. Although development of ACC systems begin in the late seventies, marketing is now possible after significant progress in both sensor and signal processing technologies. Sensors, on one hand, need to measure accurately the distance and relative speed to preceding vehicles, be easily and cheaply producible, and must meet the strict requirements of the automotive market. On the other hand, the signal processing must guarantee the desired resolution of the processed data while keeping rigorous timing constraints. Progress in these areas was partly triggered by the PROMETHEUS project, an European project involving all European research project involving all European car manufacturers, initializing similar activities in Japan and U.S.
In this report, the main components, which typically make up such an ACC system, are described. The control strategy and the system architecture of ACC system are explained. Then the principal limits, safety assured, as well as the simulated effects on the traffic flow are pointed out.
Download full seminar papers At
http://www.enjineer.com/forum
Sunday, March 27, 2011
Short Term Course on Environment Management in Process Industries At National Institute of Technology, Jalandhar
Short Term Course on Environment Management in Process Industries At National Institute of Technology, Jalandhar
OBJECTIVES
The tremendous increase in world population needs greater requirement of resources to improve human life.
However, this in turn has resulted into a tremendous load on mother earth. Process industries are a major source of hazardous and non-hazardous pollutants. It is, therefore, important to balance the economic growth with the conservation of natural resources. Process industries need to switch over to the environmentally benign technologies. It is important to practice efficient management methods in processes for waste minimization, to develop cost effective waste treatment technologies, and to provide better working conditions to the workers in regard to health and safety. The objectives of the above course are
to bridge the gap between the academia and the industry, and to update the knowledge and skills of the technical teachers and process engineers in the current and emerging issues related to the areas of environment, health and safety.
COURSE CONTENT
The following topics, but not limited to, are proposed to be covered during the short term course:
* Pollution control and abatement
* Environment, health and safety laws
* Air and water quality standards
* Data acquisition and air dispersion modeling
* Novel bio-filtration methods
* Membrane assisted treatment methods
* Solid waste management
* Green and clean process technologies
* Modeling of pollution control systems
* Environment Impact assessment
* Inherently safer designs
* Process safety and risk assessment
* Security vulnerability methodologies
* Occupational safety and health
* Industrial hygiene
* Current and emerging issues
* Discussion on case studies
The faculty of the course will be the experienced personnel from teaching, education, research and consultancy organizations, field and industry such as IITs, NITs, CSIR etc.
PARTICIPANTS
A faculty of an engineering or technical institution (approved by AICTE) can attend the course. The
programme is interdisciplinary one. Only limited number of seats are available. The interested person needs to apply to any of the coordinators of the course in the prescribed proforma by due date through proper channel.
REGISTRATION FEE
(a) Academic Institutes Nil
(b) Industries (Non-refundable) Rs. 2000/-
• The fee from the industry personnel will be paid in the form of Demand Draft drawn in favour of Director,
NIT Jalandhar, payable at Jalandhar
• Last date of receiving completed registration forms (through proper channel) is May 06, 2011.
• The selected participants will be informed through email/ phone by May 13, 2011.
The registration process will be completed only when the registration form is received, however, the candidates may send an advance copy directly through email, post or by hand. A to and fro 3-AC train fare/ AC bus fare by the shortest route will be reimbursed to the participants from academic institutes only on producing the tickets.
LOCATION
The institute is located at a distance of 12 km from Jalandhar Bus Stand, 10 km from Jalandhar City Railway
Station and 16 km from Jalandhar Cantt. railway station. The city has major road and rail connection, is a market for agricultural products and manufactures including textiles, leather goods, wood products and sports goods. Jalandhar is an important station in Amritsar - New Delhi railway route. Jalandhar is situated 150 kms from Chandigarh and 60 kms from Ludhiana.
for Participation, Register with
N. K. Srivastava
Course Coordinator
Department of Chemical Engineering
Dr. B. R. Ambedkar National Institute of Technology
Jalandhar - 144011, Punjab.
Phone: 0181-2690301-302, Ext.: 2409
Fax: 0181-2690320, 2690932 (by attention)
Cell: 098887-12889, email: srivastavank@nitj.ac.in
website: http://www.nitj.ac.in/News/stc.pdf
OR
Shailendra Bajpai
Course Coordinator
Department of Chemical Engineering
Dr. B. R. Ambedkar National Institute of Technology
Jalandhar - 144011, Punjab.
Phone: 0181-2690301-302, Ext.: 2411
Fax: 0181-2690320, 2690932 (by attention)
Cell: 098888-95253, email: bajpais@nitj.ac.in
website: http://www.nitj.ac.in/News/stc.pdf
Download full seminar papers At
http://www.enjineer.com/forum
OBJECTIVES
The tremendous increase in world population needs greater requirement of resources to improve human life.
However, this in turn has resulted into a tremendous load on mother earth. Process industries are a major source of hazardous and non-hazardous pollutants. It is, therefore, important to balance the economic growth with the conservation of natural resources. Process industries need to switch over to the environmentally benign technologies. It is important to practice efficient management methods in processes for waste minimization, to develop cost effective waste treatment technologies, and to provide better working conditions to the workers in regard to health and safety. The objectives of the above course are
to bridge the gap between the academia and the industry, and to update the knowledge and skills of the technical teachers and process engineers in the current and emerging issues related to the areas of environment, health and safety.
COURSE CONTENT
The following topics, but not limited to, are proposed to be covered during the short term course:
* Pollution control and abatement
* Environment, health and safety laws
* Air and water quality standards
* Data acquisition and air dispersion modeling
* Novel bio-filtration methods
* Membrane assisted treatment methods
* Solid waste management
* Green and clean process technologies
* Modeling of pollution control systems
* Environment Impact assessment
* Inherently safer designs
* Process safety and risk assessment
* Security vulnerability methodologies
* Occupational safety and health
* Industrial hygiene
* Current and emerging issues
* Discussion on case studies
The faculty of the course will be the experienced personnel from teaching, education, research and consultancy organizations, field and industry such as IITs, NITs, CSIR etc.
PARTICIPANTS
A faculty of an engineering or technical institution (approved by AICTE) can attend the course. The
programme is interdisciplinary one. Only limited number of seats are available. The interested person needs to apply to any of the coordinators of the course in the prescribed proforma by due date through proper channel.
REGISTRATION FEE
(a) Academic Institutes Nil
(b) Industries (Non-refundable) Rs. 2000/-
• The fee from the industry personnel will be paid in the form of Demand Draft drawn in favour of Director,
NIT Jalandhar, payable at Jalandhar
• Last date of receiving completed registration forms (through proper channel) is May 06, 2011.
• The selected participants will be informed through email/ phone by May 13, 2011.
The registration process will be completed only when the registration form is received, however, the candidates may send an advance copy directly through email, post or by hand. A to and fro 3-AC train fare/ AC bus fare by the shortest route will be reimbursed to the participants from academic institutes only on producing the tickets.
LOCATION
The institute is located at a distance of 12 km from Jalandhar Bus Stand, 10 km from Jalandhar City Railway
Station and 16 km from Jalandhar Cantt. railway station. The city has major road and rail connection, is a market for agricultural products and manufactures including textiles, leather goods, wood products and sports goods. Jalandhar is an important station in Amritsar - New Delhi railway route. Jalandhar is situated 150 kms from Chandigarh and 60 kms from Ludhiana.
for Participation, Register with
N. K. Srivastava
Course Coordinator
Department of Chemical Engineering
Dr. B. R. Ambedkar National Institute of Technology
Jalandhar - 144011, Punjab.
Phone: 0181-2690301-302, Ext.: 2409
Fax: 0181-2690320, 2690932 (by attention)
Cell: 098887-12889, email: srivastavank@nitj.ac.in
website: http://www.nitj.ac.in/News/stc.pdf
OR
Shailendra Bajpai
Course Coordinator
Department of Chemical Engineering
Dr. B. R. Ambedkar National Institute of Technology
Jalandhar - 144011, Punjab.
Phone: 0181-2690301-302, Ext.: 2411
Fax: 0181-2690320, 2690932 (by attention)
Cell: 098888-95253, email: bajpais@nitj.ac.in
website: http://www.nitj.ac.in/News/stc.pdf
Download full seminar papers At
http://www.enjineer.com/forum
Saturday, March 26, 2011
Current Opening At NATIONAL INSTITUTE OF TECHNOLOGY, SRINAGAR
Current Opening At NATIONAL INSTITUTE OF TECHNOLOGY, SRINAGAR
Applications on plain paper are invited giving detailed bio-data along with attested copies of certificates of all academic qualification for engagement of candidates as Lecturer in the following disciplines of this Institute for academic arrangement purely on contract basis on fifty nine (59) days basis with usual breaks of two working days after each spell of 59 days during the Spring Session -2011 :-
1. Chemical Engg.
2. Civil Engineering
3. Mathematics
4. Chemistry
Qualification:
A) B.Tech/B.E. Ist Divison or equivalent. Preference will be given to ME/M.Tech Candidates (for ngineering Deptts)
B) M.Sc in respective disciplines Chemistry/ Mathemtics. M.Phil , Ph.D candidates will be given preference.
Monthly consolidated remuneration will be Rs.22, 000/- for B.E. /B.Tech /M.Phil/M.Sc and Rs. 23,500/- for M.Tech/M.E and Rs.25,000/- for Ph.D.
The applications complete in all respects should reach the undersigned on or before 30.03.2011. The arrangement can be terminated any time due to un- satisfactory performance.
RESERVATION SHALL BE APPLICABLE AS PER THE POLICY OF GOVT. OF INDIA NO TA/DA WILL BE PAID TO THE CANDIDATES FOR ATTENDING THE INTERVIEW. THE ELIGIBLE CANDIDATES WILL BE INTERVIEWED IN THE COMMITTEE ROOM OF THE INSTITUTE ON THE FOLLOWING DATES:
1. Civil Engg. 02.04.2011 at 11. 00 A.M
2. Chemistry 05.04.2011 at 02 P.M
3. Mathematics 05.04.2011 at 11.00 A.M
4. Chemical 06.04.2011 at 11 A..M
Contact Us
Prof. Ajaz Hussain Mir
Professor (I/C)
Training and Placement Deptt.
National Institute of Technology, Srinagar,
Jammu & Kashmir, India. Pin- 190 006
Phone : (Office) 0194 - 2424809 (Direct), 2429423 Ext. 2130, 2705
Fax : 0194 - 2424809, 2420475
Mobile : +91-9419010409
Email : placements@nitsri.net, ahmir@rediff.com
website: http://www.nitsri.net/advertise/Contract_Mar11.pdf
Download full seminar papers At
http://www.enjineer.com/forum
Applications on plain paper are invited giving detailed bio-data along with attested copies of certificates of all academic qualification for engagement of candidates as Lecturer in the following disciplines of this Institute for academic arrangement purely on contract basis on fifty nine (59) days basis with usual breaks of two working days after each spell of 59 days during the Spring Session -2011 :-
1. Chemical Engg.
2. Civil Engineering
3. Mathematics
4. Chemistry
Qualification:
A) B.Tech/B.E. Ist Divison or equivalent. Preference will be given to ME/M.Tech Candidates (for ngineering Deptts)
B) M.Sc in respective disciplines Chemistry/ Mathemtics. M.Phil , Ph.D candidates will be given preference.
Monthly consolidated remuneration will be Rs.22, 000/- for B.E. /B.Tech /M.Phil/M.Sc and Rs. 23,500/- for M.Tech/M.E and Rs.25,000/- for Ph.D.
The applications complete in all respects should reach the undersigned on or before 30.03.2011. The arrangement can be terminated any time due to un- satisfactory performance.
RESERVATION SHALL BE APPLICABLE AS PER THE POLICY OF GOVT. OF INDIA NO TA/DA WILL BE PAID TO THE CANDIDATES FOR ATTENDING THE INTERVIEW. THE ELIGIBLE CANDIDATES WILL BE INTERVIEWED IN THE COMMITTEE ROOM OF THE INSTITUTE ON THE FOLLOWING DATES:
1. Civil Engg. 02.04.2011 at 11. 00 A.M
2. Chemistry 05.04.2011 at 02 P.M
3. Mathematics 05.04.2011 at 11.00 A.M
4. Chemical 06.04.2011 at 11 A..M
Contact Us
Prof. Ajaz Hussain Mir
Professor (I/C)
Training and Placement Deptt.
National Institute of Technology, Srinagar,
Jammu & Kashmir, India. Pin- 190 006
Phone : (Office) 0194 - 2424809 (Direct), 2429423 Ext. 2130, 2705
Fax : 0194 - 2424809, 2420475
Mobile : +91-9419010409
Email : placements@nitsri.net, ahmir@rediff.com
website: http://www.nitsri.net/advertise/Contract_Mar11.pdf
Download full seminar papers At
http://www.enjineer.com/forum
Subscribe to:
Posts (Atom)