International Conference on Advanced Computing Methodologies (ICACM 11) At Gokaraju Rangaraju Institute Of Engineering and Technology, Bachupally, Kuk

International Conference on Advanced Computing Methodologies (ICACM 11) At Gokaraju Rangaraju Institute Of Engineering and Technology, Bachupally, Kukatpally, Hyderabad, Andhra Pradesh

Call for Papers

Submission of draft papers:

1. The paper is in a single column format and is formatted according to the Springer Lecture Notes instructions (click here for instructions/sample paper).
Is your paper formatted like this? (yes/no)

2. in order to conduct a blind review, authors should omit their names and affiliations from ALL places in the draft paper (these details can be added in the final/camera ready paper if the draft is accepted). In addition, while the references should include all published literature relevant to the paper, including previous works, if any, of the (co)authors, it should not include unpublished works. When referring to the (co)author's own work, use the third person rather than the first person. For example, say “Previously, Ram and John [16] have proved that...”, rather than “In our previous work [16] we have proved that...". Such identifying information can be added to the camera ready paper, if the draft paper is accepted.
Is your paper formatted like this? (yes/no)

3. The paper has no acknowledgements to any person/organization, etc. Acknowledgements can be added to the camera ready paper, if the draft paper is accepted.
Is your paper formatted like this? (yes/no)

4. The maximum length of the paper is 20 pages.
Is the length of your paper within this range? (yes/no)

5. Do not submit a paper if it is already published or submitted for publication or review
Is your paper NOT submitted elsewhere for review or publication? (yes/no)

If the answers to all the above questions are "yes" then only click here to go to the next level of submission.

Easy Chair Registration Steps

1. Click on the "sign up for an account" link if u don't have easychair account. Else log on using username and password and then continue your submission process.

2.
a) You should type the two words that you see in the image below and click on "Continue".
b) If you type the words correctly, you will be asked to fill out a simple form with your personal information.
c) After you filled out the form, EasyChair will send you an email with a link that you can use to create an account.

3. The email consists of a link, click on that and continue.

4. This is the final step of your registration. Fill all the fields which are asked. You should remember your username and password for further process and then go on to "create my account" button.

5. Your account will be created. Log on using username and password given in step 4 for submitting your paper.

Note: Papers that do not follow the above instructions may be dropped from consideration without further notice at any time.

Topics

Topics related to the design, analysis and implementation of Computing techniques.These include, but are not limited to the following areas:

* Computing Techniques
* Computing Support
* Autonomic Database Systems
* Data Warehousing
* Knowledge Discovery
* Computer Networking
* Mobile Computing
* Nano Computing
* Parallel Computing
* VLSI Design
* Modeling Systems
* Optimization Techniques
* Embedded Systems
* Grid Computing
* Pervasive Computing
* Multimedia Systems
* Open Source Systems
* Security in Software and Networks
* Engineering Applications

Instructions for Submissions

These guidelines include complete descriptions of the fonts, spacing, and related information for producingyour submission.

Paper Size: A4

One of the goals of the conference is to bring the Academic and Industrial Research community’s closer. The Conference is soliciting original high quality research papers on all aspects of Advanced Computing Techniques.

Paper Format :( Ms-Word and Adobe PDF)

•Length: Allowed a total of 7 pages for document (including all figures, tables, and references). Additional pages cost Rs.300/ $20 per page with a maximum of 6 pages.

•Paper Title: The main title (on the first page) should begin 1-3/8 inches (3.49 cm) from the top edge of the page, centered, and in Times 14-point, boldface type. Leave two 12-point blank lines after the title.

• Author names & affiliations: Author names and affiliations are to be centered beneath the title and printed in Times 12-point, non-boldface type. Multiple authors may be shown in a two- or three-column format, with their affiliations italicized and centered below their respective names. Include e-mail addresses if possible. Author information should be followed by two 12-point blank lines.

• Margins: Any text or other material outside the margins specified below will not be accepted. All printed material, including text, illustrations, and charts, must be kept within a print area of 6-1/2 inches (16.51 cm) wide by 8-7/8 inches (22.51 cm) high. All text must be in a two-column format. Columns are to be 3-1/16 inches (7.85 cm) wide, with a 3/8 inch (0.81 cm) space between them. Text must be fully justified. A format sheet with the margins and placement guides is available as PDF file. It contains lines and boxes showing the margins and print areas. If you hold it and your printed page up to the light, you can easily check your margins to see if your print area fits within the space allowed.

•Second page and following pages: The second and following pages should begin 1.0 inch (2.54 cm) from the top edge. On all pages, the bottom margin should be approximately 1-5/8 inches (4.13 cm) from the bottom edge of the page.

•Typeface: We strongly encourage authors to use Times-Roman 10-point font. If a font face is used that is not recognized by the submission system, your proposal will not be reproduced correctly. No font size smaller than 9 points should be used anywhere in your paper, including figure captions. Avoid using bit-mapped fonts if possible. True-Type 1 fonts are preferred.

•Main Text: Type your main text in 10-point Times, single-spaced. Do not use double-spacing. All paragraphs should be indented 1/4 inch (approximately 0.5 cm). Be sure your text is fully justified—that is, flush left and flush right. Please do not place any additional blank lines between paragraphs.

•Figure and Tabel: High quality, camera ready figures and/or tables are required. Captions should be 10-point boldface Helvetica (or a similar sans-serif font). Initially capitalize only the first word of each figure caption and table title. Figures and tables must be numbered separately.

•Headings:

First-order: For example, “1. Introduction”, should be Times 12-point boldface, initially capitalized, flush left, with one blank line before, and one blank line after. Use a period (“.”) after the heading number, not a colon.
Second-order: As in this heading, they should be Times 11-point boldface, initially capitalized, flush left, with one blank line before, and one after.
Third-order: Third-order headings, as in this paragraph, are discouraged. However, if you must use them, use 10-point Times, boldface, initially capitalized, flush left, preceded by one blank line, followed by a period and your text on the same line.

•Footnotes: Use footnotes sparingly (or not at all) and place them at the bottom of the column on the page on which they are referenced. Use Times 8-point type, single-spaced.

•References: List and number all bibliographical references in 9-point Times, single-spaced, at the end of your paper. When referenced in the text, enclose the citation number in square brackets, for example [1]( For more than one citation [1,2]).Where appropriate, include the name(s) of editors of referenced books.

[1] V. Daneul, C. Joey, and A.B. Kalam , “Article Title”, Journal/Proceedings, Location,month,pp.1-10,year.

[2] V. Daneul, C. Joey, and A.B. Kalam , Book Title, Publisher, Location, publication year.

Downloads

Author Instructions
Copyright Form
Template

Important Dates

Deadlines:
Abstract Submission: 15 Sept 2011
Full Paper Submission: 16 Oct 2011
Notification of Acceptance: 5 Nov 2011
Camera Ready Paper: 15 Nov 2011

Registration Fees

Foreign Delegates : $125
Academic Staff/Industry : Rs.3000
Research Scholars : Rs. 2000
Students : 1500

Venue

Gokaraju Rangaraju Institute Of Engineering and Technology,
Bachupally, Kukatpally,Hyderabad-500072, Andhra Pradesh, India.
Tel :+91-40-23042555,23042666,23042777
Fax : +91-40-230408060
Website : gokaraju.org (or) griet.ac.in
E-mail : icacmgriet@gmail.com

Accommodation

HYDERABAD: THE PEARL CITY

Hyderabad, the capital of Andhra Pradesh, along with its twin city Secunderabad has over 400 years of history. Hyderabad is a heady mixture of heritage, traditionally hospitality and a thriving software revolution.

The fifth largest city in India and has a population of over 2.2 million. Hyderabad is famous world over for its fabulous Diamond markets, glass embedded bangles and the delectable Hyderabadi cuisine.

Contact us

Convener ( ICACM2011)
Dr. T. V. Rajinikanth
Professor, Head of IT
Gokaraju Rangaraju Institute Of Engineering and Technology,
Bachupally, Kukatpally,Hyderabad, Andhra Pradesh, India - 500090.
Tel :+91-40-65864440 / 4441
Fax : +91-40-230408060
Website: http://www.gokaraju.org
http://www.griet.ac.in
E-mail : icacm2011@griet.ac.in (or) icacmgriet@gmail.com

Download full seminar papers At
http://www.enjineer.com/forum